CONTENTS
| Page |
| Page | |
General Information |
| Basic Operation |
| |
Precautions | . . . 2 |
| ||
General control . | . . .10 | |||
Controls and indicators | . . . 3 | |||
|
|
Preparation for Use |
| References |
| |
| Troubleshooting chart | 11 | ||
System preparation | 4 - 5 | |||
Maintenance | 11 | |||
Falling prevention . . | . . . 5 | |||
Specifications | 12 | |||
Placing the system . | . . . 6 | |||
|
| |||
System Connections | 6 - 9 |
|
|
Precautions
■General
●Please ensure that the equipment is positioned in a
10 cm (4") 10 cm (4") | 10 cm (4") | |||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
10 cm (4")
●Use the unit on a firm, level surface free from vibration.
●Keep the unit away from direct sunlight, strong magnetic fields, excessive dust, humidity and electronic/electrical equipment (home computers, fax machines, etc.) which generate electrical noise.
●Do not place anything on top of the system.
●Do not expose the unit to moisture, to temperatures higher than 60°C (140°F) or to extremely low temperatures.
●If your system does not work properly, disconnect the AC power lead from the wall socket and replug.
●In case of an electrical storm, unplug the unit for safety.
●Hold the AC power plug by the head when removing it from the wall socket, as pulling the lead can damage internal wires.
●The AC power plug is used as a disconnect device and shall always remain readily operable.
●Do not remove the outer cover, as this may result in electric shock. Refer internal service to your local SHARP service facility.
●The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, etc.
●No naked flame sources, such as lighted candles, should be placed on the apparatus.
●Attention should be drawn to the environmental aspects of battery disposal.
●This unit should only be used within the range of 5°C - 35°C (41°F - 95°F).
●The apparatus is designed for use in moderate climates.
Warning:
The voltage used must be the same as that specified on this unit. Using this product with a higher voltage other than that which is specified is dangerous and may result in a fire or other type of accident causing damage. SHARP will not be held responsible for any damage resulting from use of this unit with a voltage other than that which is specified.