CLEANING AND MAINTENANCE

FILTER

Every week or more often if necessary

The filter must be cleaned regularly in order to maintain the ion density.

Filter soiling depends on the usage environment, so clean the filter about once a week or whenever the filter is clogged, even if the Filter Clean Light has not turned on.

Gently remove dust

1 from the filter of back side by using a vacuum cleaner.

Filter

<For Stubborn Dirt>

Remove and rinse in water. (Use a soft sponge if the dirt does not come off easily.)

Be careful the cushioning material does not come off.

Rinse

Wipe with a dry cloth. Reattach

(Dry in the shade.)

Do not press the vacuum cleaner strongly against the filter, or the filter could be damaged.

If using synthetic kitchen detergent, rinse well to remove all traces of the detergent. Also, be sure to dry the filter in the shade.

2 Once cleaning is completed, connect the car adapter, then press and hold in the Reset Button for at least 3 seconds to turn off the filter clean light.

Filter Clean Light

Filter Clean Light will be lit after approx. 3 month (approx. 720 hours), when operated 8 hours a day.

Reset Button

Even if the Filter Clean Light is off, press and hold in the Reset Button for at least 3 seconds after cleaning.

RESET (Press 3sec.)

MODE

FILTER

RESET

CLEAN

(Press 3sec.)

Filter Clean

UNIT

Light

MODE

When the Reset Button is pressed and held in for at least 3 seconds, the light flashes twice then turns off.

MAIN UNIT

Every month or more often if necessary

Wipe with a dry soft cloth.

<For Stubborn Dirt> Use water and a mild detergent. And then, wipe with a wet cloth. Make sure to dry out the main unit.

E-12

Page 14
Image 14
Sharp IG-BC2UB manuel dutilisation Cleaning and Maintenance, Filter, Main Unit, Every week or more often if necessary