Sharp operation manual Basic Operation -Recording, 03/7/21 IM-DR410E 3.fm, Before recording

IM-DR410E

Recording

Basic Operation -Recording-

16

Before recording

Cancel the hold mode.

The portable MD does not work whilst in the hold mode. As for the details, see page 14.

1 Press the REC button.

2 Begin playback on the stereo system con- nected to this portable MD.

3 Press the or button to adjust the re- cording level.

Analogue recording (connecting with analogue cable)

Adjust the recording level so that the maximum sound vol- ume from the source makes the reading swing somewhere be- tween -4 dB and 0 dB.

0 - 30

Digital recording (connecting with digital cable)

You can adjust the level in 1 dB increments between + 10 dB and - 10 dB.

+ 10 dB to - 10 dB

Once you adjust the recording level, the setting is re- tained even after the recording stops. (For cancella- tion instructions for the digital recording level, see page 27.)

The sound from the earphones does not change even if the digital recording level is adjusted.

4 Press the PAUSE button on the stereo sys- tem to enter the playback pause mode.

Here, you can search for the track to be recorded.

IM-DR410E TINSE0550AWZZ

03/7/21 IM-DR410E_3.fm