Sharp Inside Pro ANTI-TIPBLOCK, MICROWAVE DRAWER MEASUREMENTS

INSTALLATION MANUAL

MICROWAVE DRAWER MEASUREMENTS

electrical outlet		6"
location			2x4 Anti-
			Tip block
	5"		3 1/2"
4"			14 3/4"
28 7/16"
opening	allow 1/4"		to bottom
			of Anti-Tip
allow 3/4"	overlap
			block
overlap
		14 3/4"
23 1/2"	allow 3/4	opening
min depth	overlap
36"
countertop	allow 7/16"		floor must
height			support
	overlap
			100 lbs.

84" wall cabinet

electrical outlet
location	(6")

optional wall oven cutout illustrated in sketch

2x4 Anti-Tip block

Figure 1

19"

to top of floor

NOTE: Open Top

30" *Cabinet illustrated cabinet min.

	5"
4"	2" minimum

3 1/2"

Figures 1 and 2 contain many Microwave Drawer measurements for reference when planning the drawerʼs location.

28 7/16"
opening		allow 1/4"
allow 3/4"		overlap
overlap
23 1/2"		14 3/4"
	allow 3/4"	opening
min depth
	overlap
		allow 7/16"
		overlap

*19"

to top of floor (recommended)

30"

cabinet min.

Figure 2

14 3/4"
to bottom	4 11/16"	28 1/8"
of Anti-Tip
block	2"

floor must
support 100 lbs.	15 13/32"

14 19/32"

15" auto drawer

opening

23 3/8"

Figure 3 1 13/16"

door thickness

30"

ANTI-TIP BLOCK

(6")

2x4 Anti-

Tip block

Figure 4

NORMAL INSTALLATION STEPS

ANTI-TIP BLOCK INSTALLATION INSTRUCTIONS

To reduce the risk of tipping of the drawer, the Anti-Tip block must be properly installed located 14 3/4-inches above the floor on which the Microwave Drawer will sit. The 6-inch 2 x 4 Anti-Tip block must be provided by the installer. See Figures 1, 2 and 4. The Anti-Tip block prevents serious injury that might result from spilled hot liquids.

If the Microwave Drawer is ever moved to a different location, the Anti-Tip block must also be moved and installed. When installed to the wall, make sure that the screws completely penetrate the dry wall and are secured in wood or metal so that the block is totally stable. When fastening, be sure that the screws do not penetrate electrical wiring or plumbing.

3