1Hang hood from (4) mounting screws. Slide hood towards wall until mounting screws are engaged in narrow end of

(4) keyholes. Tighten mounting screws securely. A long screwdriver works best.

2Replace bottom cover.

3Connect ductwork to hood. Use duct tape to make joints secure and air tight.

If hood is to be installed Non-Ducted:

•Purchase a set of (2) charcoal filters, model KBK-330, from your local distributor, retailer or from Sharp (see page 2).

INSTALL HOOD

4 Install (2) PAR20, 50 W Maximum Halogen Bulbs or

(2) R16, 40 W Maximum Incandescent Bulbs. Purchase bulbs separately.

5Replace filters, turn on power at service panel and test for proper operation.

NON-DUCTED FILTERS

•Attach charcoal filters to the aluminum mesh filters. Be sure that the sides with the blue and yellow stripes are facing down (toward the range top).

9