boil dry, permanent damage may affect the ceramic glass surface.
•Do not slide pots and pans across the cooktop surface.
•Cookware with rough bottoms can mark or scratch the cooktop surface.
•Do not use a dull or nicked blade. Be sure to use a new, sharp razor scraper.
Microwave DRAWER
Interior
Cleaning is easy because no heat is generated to the interior surfaces; therefore, there is no baking and setting of spills or spattering. To clean the interior surfaces, including drawer sealing surfaces, wipe with a soft damp cloth. DO NOT USE ABRASIVE OR HARSH CLEANERS OR SCOURING PADS. For heavier soil, use mild soap; wipe clean with a soft damp cloth. Do not use any chemical oven cleaners.
Microwave Drawer Guides
Remove the food crumbs from the Microwave Drawer guides. Wipe with a soft dry cloth in order to keep the Microwave Drawer opening and closing easily.
Waveguide Cover
ATTENTION The waveguide cover (located on the inside top of the microwave drawer area) is made from mica, so it requires special care. Keep the waveguide cover clean to assure good microwave performance. Carefully wipe with a soft damp cloth any food spatters from the surface of the cover immediately after they occur.
Odor Removal
Occasionally, a cooking odor may remain in the Microwave Drawer. To remove, combine 1 cup water, grated peel and juice of one lemon and several whole cloves in a
OVEN
CAUTION Before cleaning any part of the oven, be sure the oven is turned off. If not, Touch Stop/Clear.
Allow the oven to cool before cleaning.
Inside of the door
You do not need to clean the area inside the gasket by hand since the area is cleaned during the
Do not rub, clean or move the door gasket. Replace gasket when it is worn or frayed.
The area outside the gasket and the door liner can be cleaned with a
Cleaning and care
detergent. Rinse well with a vinegar and water solution.
Inside of the oven
See page 39.
Remove and replace oven door
1Open the door to the fully opened position.
2Pull the lock located on both hinge supports up and engage in the hook of the hinge levers. You may have to apply a little downward pressure on the door to pull the locks fully over the hooks.
3Grab the door by the sides, pull the bottom of the door up and toward you to disengage the hinge supports. Keep pulling the bottom of the door toward you while rotating the top of the door toward the range to completely disengage the hinge levers.
4Proceed in reverse to reinstall the door.
Make sure the hinge supports are fully engaged before unlocking the hinge levers.
CAUTION The door is very heavy. For safe, temporary storage, lay the door flat with the inside of the door facing down.
Lock in normal position.
Lock engaged for door removal.
Door removed from the range.
43