Sharp KC-840E, KC-850E, KC-860E E-7, Remove the Water Tank by unlatching the top., Remove the Water Tank Cap and carefully ll the Water Tank with tap water., After lling, securely tighten the Tank Cap., Replace the Water Tank in the unit.

ENGLISH
DEUTSCH
NEDERLANDS
РУССКИЙ
FRANÇAIS
E-7
REFILLING THE WATER TANK
CAUTION
Tank Handle
Water Tank
Tank Cap
Water Tank
Humidifying
Tray
tighten
• Do not expose the unit to water. Short circuit and/or electrical shock may occur as a result.
• Do not use hot water (40 ºC), chemical agents, aromatic substances, dirty water, or other
damaging substances, deformation and/or malfunction may occur.
• Use only fresh tap water. Use of other water sources may promote the growth of mold, fun-
gus and/or bacteria.
The unit can be used in the Clean Air Mode without
putting water in the Water Tank. When using the Clean
Air & Humidify Mode, or the CLEAN ION SHOWER
Mode, the Water Tank should be lled with water.
1
Remove the Water Tank by unlatching the
top.
2
Remove the Water Tank Cap and carefully
ll the Water Tank with tap water.
• Change the water in the Water Tank every day with
fresh tap water.
3
After lling, securely tighten the Tank Cap.
• Check to see that there is no water leaking.
• Be sure to wipe off any excess water on the outside of
the Water Tank.
• When carrying the Water Tank, hold it with both hands
so that the Water Tank opening is facing up.
4
Replace the Water Tank in the unit.
• The top latch will “click” in place when the Water Tank
is properly installed.
KC-840E_Eng2.indd 7 08.10.10 9:23:26 AM