PREPARATION

Using the Remote Control

Use the remote control by pointing it towards the remote control sensor window on the main unit. Objects between the remote control and sensor window may prevent proper operation.

Cautions regarding use of the remote control

Do not expose the remote control to shock. In addition, do not expose the remote control to liquid, and

do not place in an area with high humidity.

Do not install or place the remote control under direct sunlight. The heat may cause deformation of the unit.

The remote control may not work properly if the remote control sensor window of the main unit is under direct sunlight or strong lighting. In such case, change the angle of the lighting or LCD TV set, or operate the remote control closer to the remote control sensor window.

POWER OPC HEADPHONE

HEADPHONE jack

OPC indicator

POWER indicator

Remote control sensor

OPC sensor

Batteries for the Remote Control

Before using the LCD TV set for the first time, install two (“AAA” size, UM/SUM-4) batteries (supplied). When the batteries become depleted and the remote control fails to operate, replace the batteries with new (“AAA” size, UM/SUM-4) batteries.

1 Open the battery

2 Insert two (“AAA” size, UM/

3 Close the battery

cover.

SUM-4) batteries.

cover.

 

 

 

+

 

 

+

 

 

 

Slide the cover while pressing the (Y) part.

Position the positive and negative ends of the batteries as indicated in the compart- ment.

Engage the claw on the cover into the battery housing and slide shut.

Caution!

Cautions regarding batteries

Improper use of batteries can result in chemical leakage and/or explosion. Be sure to follow the instruc- tions below.

Place batteries with their terminals corresponding to the (+) and (–) as indicated in the compartment.

Different types of batteries have different characteristics. Do not mix batteries of different types.

Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new battery and/or cause the old battery to leak chemicals.

Remove batteries when they become weak.

Chemicals that leak from batteries can cause a rash. If chemical leakage is found, wipe with a cloth.

The batteries supplied with the product may have a shorter life expectancy due to storage conditions.

If the remote control will not be used for an extended period of time, remove the batteries from the remote control.

8

Page 8
Image 8
Sharp LC-13S2U, LC-15S2U, LC-20S2U operation manual Preparation, Using the Remote Control, Batteries for the Remote Control