Sharp LC-19SB28UT Connecting an Audio Amplifier, Connecting a PC, When using coaxial cable

Connecting to External Equipment

Connecting an Audio Amplifier

■ When using coaxial cable:

It is possible to output audio through the DIGITAL AUDIO COAXIAL terminal.

Rear of the TV

Coaxial cable

COAXIAL

DIGITAL AUDIO INPUT

Connecting a PC

■When using HDMI cable (INPUT 3):

Rear of the TV

HDMI-certified cable

HDMI OUT

NOTE

•Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI-certified cable to the INPUT 3 (HDMI) terminal, connect an audio cable to the AUDIO PC/HDMI terminal and set “HDMI1 Audio” to “DVI”. (See page 27.)

•The HDMI terminals only support digital signal.

■When using DVI-HDMI conversion cable (INPUT 3):

Rear of the TV

DVI-HDMI conversion cable

DVI OUT AUDIO

Ø 3.5 mm stereo minijack cable

NOTE

•When using an DVI-HDMI conversion cable, you should make an analog audio connection. In this case, in addition to connecting an DVI-HDMI conversion cable to the INPUT 3 (HDMI) terminal, connect an audio cable to the AUDIO PC/HDMI terminal and set “HDMI Audio” to “DVI”. (See page 27.)

16