Watching TV
Simple button operations for changing channels
You can change channels in several ways.
■Using CHr/s on the remote control unit
• Press CHr to increase the channel number.
• Press CHs to decrease the channel number.
NOTE
•CH s/r on the TV operates the same as CHr/s on the remote control unit.
CH s/r
■Changing channels with CH r/s on the remote control unit or CH s/r on the TV
Air: Press CH r and the channel change in the
order shown below:
2s3s...s68s69s2s3...
Press CH s and the channel change in the
order shown below:
3s2s69s68s...s3s2...
■Using 0 – 9 on the remote control unit
Select the channels directly by pressing buttons 0 to 9.
• The TV allows you to select up to 125 channels (1 to 125). To select a channel, enter a 2 or
a
To select a 1 or
Complete the following steps within 3 seconds.
1 Press the 0 button.
•Complete the step 2 within 3 seconds after the step 1.
2 | Press the 5 button. |
|
|
|
|
|
| ||||
| 0 |
|
| ||
|
|
|
|
| |
|
| 05 |
| ||
3 | Press ENT to enter the setting. | ||||
| • Channel selection will be made if there is no | ||||
operations for 3 seconds.
NOTE
•When selecting a
To select a
Complete the following steps within 3 seconds.
1 Press the 1 button.
•Complete the step 2 within 3 seconds after the step 1.
2 Press the 1 button again.
•Complete the step 3 within 3 seconds after the step 2.
3 Press the 5 button.
1
11
115
■Using FLASHBACK on the remote control
Cable: Press CH r and the channel change in the order shown below:
1s2s3s...s125s1s2s3...
Press CH s and the channel change in the order shown below:
3s2s1s125s...s3s2s1s...
unit
Press FLASHBACK to switch the currently tuned channel to the previously tuned channel.
Press FLASHBACK again to switch back to the currently tuned channel.
Press FLASHBACK to toggle between the currently selected input source and the previously selected one.
NOTE
•FLASHBACK will not work if no channel has been changed after the TV is turned on.
15