Basic adjustment settings
Power control
Power control setting allows you to save energy.
No signal off
When set to “Enable”, the power will automatically shut down if no signal inputs for 15 minutes.
1
2
3
4
Press MENU and the MENU screen displays.
Press c/dto select “Power Control”.
Press a/b to select “No Signal Off”, and then press ENTER.
Press c/d to select “Enable”, and then press ENTER.
|
|
|
|
|
|
| Enable |
|
| Disable |
|
|
|
|
|
|
|
•Five minutes before the power shuts down, remaining time displays every minute.
NOTE
•“Disable” is factory preset value.
•When a TV program finishes, this function may not operate.
No operation off
When set to “Enable”, the power will automatically shut down if there is no operation for 3 hours.
1
2
3
Repeat steps 1 and 2 in No signal off.
Press a/bto select “No Operation Off”, and then press ENTER.
Press c/d to select “Enable”, and then press ENTER.
•Five minutes before the power shuts down, remaining time displays every minute.
NOTE
• “Disable” is factory preset value.
24