Useful adjustment settings

View mode for 4:3 programs

1

Press VIEW MODE.

• The View mode menu displays.

 

• The menu lists the view mode options

 

selectable for the type of video signal currently

 

being received.

2

Press 0–3to select each view mode directly

while the View mode menu is still on the

 

screen.

• Each time VIEW MODE is pressed, VIEW MODE item toggles.

• You can also select VIEW MODE item by pressing ϳ/ϴ.

• You can sequentially select a view mode that has its own aspect ratio.

V I E W M O D E

0 . S I D E B A R

1 . S . S T R E T C H

2 . Z O O M

3 . S T R E T C H

[ 0 - 3 ] : S E L E C T

SIDE BAR:

Suitable for viewing conventional 4:3 programs in their normal format.

S.STRETCH (Smart stretch): Suitable for stretching 4:3 programs to fill the screen.

ZOOM:

Suitable for viewing wide-screen 2.35:1 anamorphic DVDs in full screen.

STRETCH:

This mode is useful for 1.78:1 DVDs. When viewing 1.85:1 DVDs, stretch mode will still show very thin black bands at the top and bottom of the screen.

NOTE

•You can enter to the same menu screen from (SETUP) menu.

•You cannot select “SIDE BAR” and “S.STRETCH” when a 720p or 1080i signal is being input.

View mode for HD programs

Stretch mode is available for HD programs. Suitable for viewing wide-screen 1.78:1 aspect-ratio programs. When viewing 1.85:1 programs, the stretch mode will still show very thin black bands at the top and bottom of the screen.

Picture scroll

For adjusting a picture's vertical position in ZOOM mode.

1

Press MENU and the MENU screen

displays.

2

Press ϵ/϶ to select (SETUP).

3

Press ϳ/ϴ to select “PICTURE SCROLL”,

and then press ϵ/϶.

4

SCROLL ADJUSTMENT screen displays.

To raise the picture, press ϳ. To lower the

 

picture, press ϴ.

 

SCROLL ADJUSTMENT +10

 

: ADJUST

 

 

 

The scroll amounts are as follows:

 

• 480i/480p/720p/1080i signal source:

5

Zoom: –10 to +10

Press EXIT to return to the normal screen.

NOTE

•In SIDE BAR, S.STRETCH and STRETCH mode, PICTURE SCROLL will not work.

Aspect

When the ASPECT is set to ON and the TV receives a 480i signal from the INPUT 1-3 terminals, the picture size is automatically selected (as described in the following table).

1 Press MENU and the MENU screen displays.

2

Press ϵ/϶ to select

(SETUP).

3

Press ϳ/ϴ to select “ASPECT”, and then

press ϵ/϶ to select “ON” or “OFF”.

4

Press EXIT to return to the normal screen.

 

 

 

 

 

Aspect ratio of signal

Automatic aspect size

source

 

(when ASPECT is ON)

4:3 Normal

SIDE BAR

16:9 Full

STRETCH

4:3 Letter box

ZOOM

Not defined

User-set mode

NOTE

•ASPECT is not effective for HDMI input.

•When the connected equipment does not support the aspect signal (ID-1), automatic switch-over will not operate.

25