Connecting a PC (Personal computer)
Viewing an image from a PC
Use the INPUT6 (PC) terminals to connect a PC.
NOTE
•The PC input terminals are
•Refer to page 35 for a list of PC signals compatible with the System.
•Make sure to select the same signal values for the output signal of a PC and the input signal of the LCD TV set before connecting with the PC. (See page 35.)
•Depending on the PC being used, images may not be shown without converting the output signals into external output. Please refer to your PC’s manuals regarding converting to external output.
Connecting the RGB cable
• Connect the RGB cable making sure that it fits correctly into the terminal. Then, firmly secure the connectors by tightening the screws on both sides of the plug.
To Audio output | To AUDIO HDMI/PC |
terminals | input terminal |
͌3.5 mm stereo minijack cable
(commercially available)
PC | RGB cable |
To ANALOG RGB | (commercially available) To PC IN |
output terminal | terminal |
Signal names for
|
|
|
|
|
| Pin No. | Signal name | Pin No. | Signal name | Pin No. | Signal name |
5 | 4 | 3 | 2 | 1 |
| ① | R | ⑥ | GND (Ground) | ⑪ | Not connected |
10 | 9 | 8 | 7 |
| 6 | ② | G | ⑦ | GND (Ground) | ⑫ | SDA |
|
|
|
|
|
|
| |||||
15 | 14 | 13 | 12 | 11 |
| ③ | B | ⑧ | GND (Ground) | ⑬ | HD |
|
|
|
|
|
| ||||||
|
|
|
|
|
| ④ | Not connected | ⑨ | +5V | ⑭ | VD |
|
|
|
|
|
| ⑤ | CSYNC | ⑩ | GND (Ground) | ⑮ | SCL |
NOTE
•Pin No. 5 is not used for inputting the signal.
•Pin No. 9 is not connected with the supplied RGB cable.
Displaying an image from a PC
To view an image from a PC, perform the following procedure.
①Select the INPUT6 (PC) mode using INPUT on the remote control or the LCD TV set. (See page 13.)
②Select the PC input signal. (See page 35.)
③Adjust the “PICTURE.” items if the PC image does not come in clearly. (See page 35.)
SOURCE SELECTION
0.TV
1.INPUT1
2.INPUT2
3.INPUT3
4.INPUT4
5.INPUT5
6.INPUT6
34