Sharp LC-32FB510E Useful viewing functions, Channel list, Selecting the channel you want to watch

Models: LC-32FS510E LC-32FH500E LC-32FH500S LC-32FH510E LC-32FB510E LC-32FB500E LC-32FS510S LC-32FB500S LC-32FB510S LC-32FH510S

1 30
Download 30 pages 41.9 Kb
Page 22
Image 22
Useful viewing functions

Useful viewing functions

Channel list

Selecting the channel

you want to watch

1 Press OK and the list of tuned channels will be displayed.

2 Use ▲/▼ to select the channel you want to watch and press OK.

Selecting the picture format

Selecting the picture

format manually

You can select the picture format. The selected picture format varies depending on the type of signal received.

1 Press f on the remote control unit to change between different kinds of pictures.

Channel information display

(DTV only)

You can display the channel information that you are watching at this moment by pressing pon the remote control unit.

Channel listSelecting the channel

 

Information that appears on the screen:

Program number Program name

Channel information Language

Teletext

Information about the program which is being broadcast

CLEARING THE PIN

If you lose or forget your PIN, you can clear the PIN following these steps:

1 Go to «MENU»→«LOCK»→«PASSWORD».

2 Enter “3001” to cancel out the current PIN.

The current PIN is reset to “1234”.

Sizes for SD Signal (Standard Definition)

Normal 4:3 : Keeps the original aspect ratio in a full screen display.

Zoom 14:9 : For 14:9 letterbox pictures. A thin side bar appears on each side, and you may also see bars on the top and bottom with some programs.

Panorama: In this mode, picture is stretched toward each side of the screen. The picture may appear similar to “Full” depending on broadcast signals.

Full: For 16:9 squeeze pictures.

Cinema 16:9: For 16:9 letterbox pictures. Bars may appear on the top and bottom with some programs.

Cinema 14:9: For 14:9 letterbox pictures. Bars may appear on the top and bottom with some programs.

Auto: The TV selects the picture size automatically.

Sizes for HD Signal (High Definition) HDMI

Full: Overscan image. Cuts out all sides of the picture.

Underscan: Displays a high definition picture adjusted perfectly. Picture noise may appear on the sides of picture with some programs.

Auto: this mode allows the TV to change between different picture sizes automatically.

NOTE

Some items do not appear depending on the type of received signal.

Selecting the picture formatSelecting the picture 20

Page 22
Image 22
Sharp LC-32FB510E Useful viewing functions, Channel list, Selecting the channel you want to watch, Clearing The Pin