13
Watching TV
POWER indicator
Power off.
The TV is in standby mode.
The TV is on.
Off
Red
Green

Turning on the power

Press POWER on the TV.
• POWER indicator (Green): The TV is on. (After a few seconds,
an image appears with sound.)
• After turning the power “ON” by pressing POWER on the TV,
you can turn the power ON/OFF by pressing POWER on the
remote control.

Turning off the power

Press POWER on the remote control.
• The TV enters standby mode and the image on the screen
disappears.
• The POWER indicator on the TV changes from green to red.
Press POWER on the TV.
• The POWER indicator on the TV turns off.
• When the TV is turned off by POWER on the TV, you cannot
turn on the power by pressing POWER on the remote control.
NOTE
• If you are not going to use this TV for a long period of time, be
sure to remove the AC cord from the AC outlet.
• Minor power is consumed when the unit is in standby mode.

Simple button operations for

changing channels

You can change channels in several ways.

Using CHr/son the remote control unit

• Press CHr to increase the channel number.
• Press CHs
to decrease the channel number.
NOTE
•CHr/s on the TV operates the same as CHr/son
the remote control unit.

Using 0 – 9 on the remote control unit

Select the channels directly by pressing buttons 0 to
9.
a
To select a 1-digit channel (e.g. channel 2):
• Press 0, followed by 2.
To select a 2-digit channel (e.g. channel 12):
• Press 1, followed by 2.
When viewing Teletext information
View a page directly which is 3-digit page number from
100 to 899 by pressing buttons 0 to 9.
Channel display

MONO

12

SAT.1

12

SAT.1

B/G

PAL

(Example)
Channel display changes approximately after 3
seconds as shown below.
POWER indicator
POWER button
POWER button
LC-AW5X_13-15 9/12/06, 10:33 AM13