Using external equipment
Displaying an external equipment image
To view external source images, select the input source from INPUT on the remote control unit or on the TV.
1Press INPUT.
• A list of selectable sources appears.
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
INPUT5
INPUT6
7INPUT7
2Press INPUT again to select the input source.
•An image from the selected source automatically displays.
•Each time INPUT is pressed, the input source toggles.
•You can also select the input source by pressing a/b.
•If the corresponding input is not plugged in, you cannot change the input. Be sure to connect the equipment beforehand.
NOTE
•See pages 13 to 16 for external equipment connection.
•You can toggle INPUT 1 and INPUT 4 by pressing GAME on the remote control unit. (See page 13.)
Input Select
If the image does not come in clearly from the external equipment connected to INPUT 1 or INPUT 7 (DVI) you may need to change the input signal type setting on the “Input Select” menu.
Selecting input signal type (INPUT 1)
1Press MENU to display the MENU screen, and then press c/d to select “Option”.
2Press a/b to select “Input Select”, and then press ENTER.
Option
Audio Only |
|
Digital Noise Reduction | [Off] |
|
|
Input Select | [Auto] |
|
|
Output Select | [Fixed] |
|
|
Press a/b to select the signal type you want
3to set, and then press ENTER.
•If the selected signal type is incorrect, images are not displayed or displayed without any color.
Auto
COMPONENT
VIDEO
4Press MENU to exit.
•The setting is stored and can be selected on the “INPUT SOURCE” menu.
NOTE
•Refer to your external equipment operation manual for the signal type.
•If you set INPUT 1 to Auto, the TV will automatically select the input signal.
•Check the operation manual of the external equipment for the signal type.
•Setting INPUT 1 signal selection to “Auto” when other equipment is connected will result in the following connection priority.
INPUT 1:
1 COMPONENT VIDEO
2VIDEO
31