Using external equipment

Displaying an image from HDMI equipment

1To watch an HDMI equipment image, select INPUT4, INPUT 5 or INPUT 6 from “INPUT SOURCE” menu using INPUT on the remote control unit or on the TV.

INPUT SOURCE

TV

INPUT1

INPUT2

INPUT3

INPUT4

INPUT5

INPUT6

7INPUT7

2Press MENU to display the MENU screen, and then press c/d to select “Option”.

3Press a/b to select “HDMI Setup”, and then press ENTER.

Audio Only

 

Digital Noise Reduction

[Low]

 

 

 

 

HDMI Setup

 

 

 

Output Select

[Fixed]

 

 

4Press a/b to select the desired item, and then press ENTER.

5Press c/d to select the desired setting, and then press ENTER.

HDMI

Selectable

 

Setup

Description

items

items

 

 

 

Auto View

Enable

Set whether or not to use

 

Disable

View Mode based on signal

 

 

recognition, including an HDMI

 

 

signal.

 

 

 

Audio

Digital

Select “Digital” for an audio

Select

Analog

signal via the HDMI terminal.

 

 

Select “Analog” for an audio

 

 

signal via the R-AUDIO -L

 

 

terminal.

 

 

 

6Press MENU to exit.

NOTE

•Refer to your external equipment operation manual for the signal type.

•“Audio Select” is only available for INPUT 6.

•When connecting an HDMI-DVI conversion adapter/cable to the HDMI terminal, the image may not come in clearly.

Input Skip

This setting allows you to skip the HDMI/DVI Input on the Input Selection operation.

1Press MENU to display the MENU screen, and then press c/d to select “Setup”.

2Press a/b to select “Input Skip”, and then press ENTER.

Press a/b to select the Input (INPUT 4,

3INPUT 5, INPUT 6 or INPUT 7) you wish to skip, and then press ENTER.

Input 4 (HDMI)

Input 5 (HDMI)

Input 6 (HDMI)

Input 7 (DVI)

YesNo

4Press c/d to select “Yes”, and then press

ENTER.

5Press MENU to exit.

33