Sharp LC-32LE600E Useful viewing functions, Programme Title Display, Time Zone, Display Settings

Useful viewing functions

Selecting the picture size

You can select the picture size. Selectable picture size varies with the type of signal received.

Item (for SD [Standard-Definition] signals)

	This mode allows the TV to switch
Auto	automatically among the different picture
	sizes.
Normal	Keeps the original aspect ratio in a full
	screen display.
	For 14:9 letterbox pictures. A thin side
Zoom 14:9	bar appears on each side, and you may
	also see bars on the top and bottom
	with some programmes.
	In this mode, the picture is stretched
Panorama	toward each side of the screen. The
	picture may appear similar to “Full”
	depending on broadcast signals.
Full	For 16:9 squeeze pictures.
	For 16:9 letterbox pictures. Bars may
Cinema 16:9	appear on the top and bottom with
	some programmes.
	For 14:9 letterbox pictures. Bars may
Cinema 14:9	appear on the top and bottom with
	some programmes.

Item (for HD [High-Definition] signals)

	This mode allows the TV to switch
Auto	automatically among the different picture
	sizes.
Full	Displays with an Overscan image. Crops
	all sides of screen.
	Displays with an Underscan image.
	Displays with the High-Definition image
Underscan	adjusted optimally. Noise may appear
	on the edge of the screen with some
	programmes.
Dot by Dot	Displays an image with the same
	number of pixels on the screen.
	Item (for PC)
Full	An image fully fills the screen.
	For letterbox pictures. Bars may appear
Cinema	on the top and bottom with some
	programmes.
Normal	Keeps the original aspect ratio in a full
	screen display.
Dot by Dot	Displays an image with the same
	number of pixels on the screen.

1Press f.

•The “WIDE MODE” menu displays.

•The menu lists the “WIDE MODE” options selectable for the type of video signal currently received.

2Press f or a/bwhile the “WIDE MODE” menu displays on the screen.

•As you toggle the options, each is immediately reflected on the screen. There is no need to press ;.

Basically, if you set “Auto” in the “WIDE MODE” menu, the optimum “WIDE MODE” is automatically chosen for every broadcast or programme played using a VCR or DVD player/recorder.

Display Settings

Channel display

You can display the channel information by pressing p on the remote control unit.

DTV mode ATV mode

TV	TV
Audio (ENG) STEREO	Audio MONO
Video	Video
Subtitle

*Four digit numbers (e.g., 0001) are displayed after selecting the five Nordic countries in the country setting.

ETime display in channel information

You can display the time information included in DTV and teletext broadcasts.

1Select a TV channel.

2Press p. The channel display will appear on the

TV.

•Each time you press p, the display format of the time display and the channel information switches.

Time and Title display

Option

Programme Title Display

This function allows you to display programme information such as the title and airtime by tuning a channel.

NOTE

•Some items do not appear depending on the type of received signal.

•Connect the PC before making adjustments for the PC input.

•Selectable picture size may vary with input signal type. HDMI: 480i/480p/576i/576p/720p/1080i/1080p ANALOGUE RGB: 576p/720p (60 Hz)/1080i/1080p

Digital Setup

Time Zone

Set up the proper time zone in your area.

23

LC-LE600E_GB3.indd 23

2009/07/14 14:38:01