TV menu
Select Auto to detect IP automatically, or select Manual to enter IP Address, Netmask, Gateway, Primary DNS, and Secondary DNS.
*IP Address
*Netmask
Input Labels
You can label each input source (except USB) with a custom description.
*Gateway
*Primary DNS
*Secondary DNS
EEConnection Test
Icon Light Up Setting
When set to “On”, the LED on the front of the TV turns on.
Check if the TV connects to network successfully or | Version Info |
not. | Displays the Software information. |
|
OAD (Manual Software Download)
When you get the software updating news from the retailer or internet, you can update the operation software using the OAD (Over Air Download). The updated software data will be transferred through the TV signal.
NOTE
•Please do not switch off the TV during the downloading process.
Power Control
You can use this function to save energy.
Reset
When you activate the Reset, the TV enters to first time installation.
Parental
Lock TV channels or connected devices with a
You have to enter a
Enter “0000” as the default password.
EEAudio Only
When set to “On”, you can turn the screen off and enjoy audio only.
EEPower Saving
When set to “On”, the TV will decrease the power consumption and increase the backlight lifespan.
EENo Operation To Sleep
Allows the TV to automatically enter standby mode when there is no operation. Select the time to 1 Hour / 2 Hours / 4 Hours. Or select Off to disable this function.
NOTE
•5 minutes before the TV enters standby mode, the remaining time is displayed every minute.
CH Block
Lock TV channels to prevent children from watching certain channels.
NOTE
•If you switch to the locked channel, you will be prompted to enter your password. (If your password is correct, the locked channel will be unlocked before the TV restarts from standby.)
Age Rating
Some digital broadcasters rate their programmes according to age. You can set TV to display only programmes with age ratings higher than your child’s.
CEC Setup
This function enables you to control the
Location
Select Store or Home. Store mode is recommended for displaying in a retail showroom, and Home mode is recommended for normal home using for energy saving.
Change password
Enter your new password in the New Password box by using the digit buttons on the remote control. Then, enter your new password again in the Confirm Password box.
Clear all parental settings
Reset all the settings in the Parental menu.
- 9
