QUICK REFERENCE
Screws
2
1
1
FRONT
31Insert the stand into the openings on the bottom of the TV.
•Make sure that the stand is fi rmly inserted into the TV. Improper installation may result in tilting of the TV set.
2Detach the stand from the TV.
Setting the TV on the Wall
CAUTION
•This TV should be mounted on the wall only with the wall mount bracket
•Installing the TV requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.
Using an optional bracket to mount the TV
•You can ask a qualifi ed service professional about using an optional
•Carefully read the instructions that come with the bracket before beginning work.
Hanging on the wall
Vertical mounting | Angular mounting |
About setting the TV angle
2Insert | tighten the 4 screws into the 4 holes |
on | the TV. |
| Soft cushion |
| Screws |
2 | 2 |
| 1 |
| 1 |
■Detaching the Stand
1Unfasten the four screws used to secure the stand in place.
AN-52AG4
0/5/10°
•The center of the display: 1 63/64 inches (50.0 mm) above the “ f ” position.
•Refer to the operation manual of AN-52AG4 for details.
•Due to the terminal configuration on this TV, when you
•To use this TV mounted on a wall, remove the covers at the 4 locations on the rear of the TV, and then use the screws supplied with the wall mount bracket to secure the bracket to the rear of the TV.