Sharp LC-60LE635E, LC-60LE636E Timer setup using EPG, Cancelling the timer setup, Teletext

Watching TV

Timer setup using EPG

You can switch to a programme at a set time.

1Press EPG.

2Press a/b/c/dto select the programme you want to set, and then press ;.

Programme info.
Back to EPG	Next
Watch	No

3Press c/dto select “Watch”, and then press

;.

•If you select “No”, the TV returns to the EPG screen.

4Press c/dto select “Yes”, and then press ;.

•The selected TV programme is marked with an icon.

5Press ;to select “Back”.

Cancelling the timer setup

1Press EPG.

2Press a/b/c/dto select the programme with timer setup, and then press ;.

3Press c/dto select “Cancel”, and then press

;.

4Press c/dto select “Yes”, and then press ;.

ECancelling using B button on the remote control unit

1Press EPG.

2Press B to display the timer setup list.

3Press a/bto select the programme you want to cancel timer setup, and then press ;.

4Press c/dto select “Cancel”, and then press

;.

5Press c/dto select “Yes”, and then press ;.

Teletext

What is teletext?

Teletext broadcasts pages of information and entertainment to specially equipped TV. Your TV receives teletext signals broadcast by a TV network, and decodes them into graphical format for viewing. News, weather and sports information, stock exchange prices and programme previews are among the many services available.

Turning teletext on/off

1Select a TV channel or external source providing a teletext programme.

2Press mto display the teletext.

•Many stations use the TOP operating system, while some use FLOF (e.g., CNN). Your TV supports both these systems. The pages are divided into topic groups and topics. After switching on the teletext, up to 2,000 pages are stored for fast access.

•If you select a programme with no teletext signal, “No Teletext available” displays.

•The same message displays during other modes if no teletext signal is available.

TELETEXT TELETEXT

•Each time you press m, the screen switches as shown above.

•Press magain to display the teletext on the right screen and the normal image on the left screen.

NOTE

•Teletext will not work if the selected signal type is RGB (Page 43).

Buttons for teletext operations

Buttons	Description
:r/s	Increase or decrease the page number.
Numeric	Directly select any page from 100 to
buttons 0_9	899 by using the 0_9 numeric buttons.

	Select a group or block of pages
Colour	displayed in the coloured brackets at
	the bottom of the screen by pressing
(R/G/Y/B)
	the corresponding colour (R/G/Y/B) on
	the remote control unit.
k(Reveal	Reveal or hide hidden information such
hidden
	as an answer to a quiz.
teletext)
3(Freeze/	Stop updating teletext pages
Hold)	automatically or release the hold mode.
	Display the subtitle or exit the subtitle
[(Subtitle	screen.
	• Subtitles will not be displayed when
for teletext)
	the service does not contain subtitle
	information.

Reveal or hide subpages.

•Move to the previous subpage (R).

1(Subpage) • Move to the following subpage (G).

•These two buttons are shown on the screen by the symbols “e” and “f”.

Display the top menu.

•The top menu will not be displayed

;when the service does not support top menus.

MHEG-5 application (UK only)

Some services bring you programmes with the MHEG application encoded, letting you experience DTV interactively. When provided, the MHEG-5 application will start when you press m.

NOTE (636 series only)

•You can view some MHEG-5 content even if you do not perform “Network setup”. Futhermore, “Network setup” allows you to view additional content such as interactive content from “Menu” > “Setup” > “View setting” > “Network setup”.

•You cannot view MHEG-5 content when MHEG-

5 content is not broadcast even if you perform the appropriate “Network setup”. Carefully check the broadcast programme.

23