Sharp LC-60LE831U Internet Setup, Interactive Service, Checking Your Internet Connection

Using the Internet

Internet Setup

Example

InitialMenu

Setup

Initial Setup

EZ Setup

Broadcasting Setup

Internet Setup

Language

[English]

DivX® Setup

Connection Type

1Press MENU to display the MENU screen, and then press c/d to select "Initial Setup".

2Press a/b to select "Internet Setup", and then press ENTER.

3Press a/b to select "Network Setup", and then press ENTER.

4Press a/b to select "Connection Type", and then press ENTER.

5Press c/d to select "Wired" or "Wireless", and then press ENTER.

•If you select "Wired", the signal is detected and setup is performed automatically. Use "IP Setup" to check and change the settings as necessary. (See page 61.)

•If you select "Wireless", use "Wireless Setup" to confi gure the access point settings.

Wireless Setup

If your access point supports Wi-Fi Protected Setup (WPS), it is recommended that you use this function for the wireless connection. You can press the WPS button on the access point to confi gure the settings automatically.

•The name of the WPS button function may differ depending on the access point. See the operation manual of the access point for details.

1Confi rm the current settings in "Connection Type".

•If "Wired" is selected, press c/d to select "Wireless".

2Press a/b to select "Wireless Setup", and then press ENTER.

•Confi rm the settings. If each setting item is correct, press MENU to exit.

•If you are confi guring the wireless setup for the fi rst time or changing the settings, go to step 3.

3Press c/d to select "Change", and then press

ENTER.

4Press a/b to select "WPS", and then press

ENTER.

•To select and register an access point manually, select "Search" or "Manual Setup" and make the necessary settings.

5Press a/b to select "Push button", and then press

ENTER.

•To confi gure the setting via PC, select "PIN code". Follow the on-screen instructions and the operation manual of the access point to confi gure the settings.

6Select "Next" to complete the settings.

•The connection process starts and the WPS button on the access point can be pressed.

7Press the WPS button on the access point.

•Pressing the WPS button displays a confi rmation screen. Please wait until a connection is established.

8When a connection is established, the connection details are displayed. Press ENTER.

Interactive Service

If you do not want other people to connect to the Internet in your absence, you can make settings to keep the TV away from the Internet.

1Press MENU to display the MENU screen, and then press c/d to select “Initial Setup”.

2Press a/b to select “Internet Setup”, and then press ENTER.

3Press a/b to select “Interactive Service”, and then press ENTER.

•Input the 4-digit secret number by using 0-9.

4Press c/d to select “No”, and then press ENTER.

•If you want to allow Internet connection, select “Yes”, and then press ENTER.

5Press MENU to exit.

Checking Your Internet Connection

Press AQUOS NET once or twice to switch to the TV+Web or Web screen.

•If "" is displayed after you connect to the Internet, check your TV's network settings and connection.

•When the original home page appears, now you are connected to the Internet.

•You can also display the AQUOS NET screen by pressing FAV APP on the remote control unit. See page 34 for details on the FAV APP key Assign function.

•If you have failed to connect to the Internet in the above operation, then an error message will appear. In this case, press EXIT to return to the normal TV screen and check the relevant settings (see page 61).

•If you still cannot connect to the Internet, please consult your Internet service provider or telephone company.

•When an application is used, you cannot make settings for "Internet Setup".

If you need to make the settings of "Internet Setup", press EXIT to return to the normal TV screen.

60