38
TV start-up time setting
View setting
Quick start
You can reduce the TV’s start-up time after turning
on the power with the remote control unit.
Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “Quick start”.
Item
On
The TV quickly starts up from standby.
Around 15 W or more of power
consumption is required during
standby.
Auto (Time shift)
The “Quick start” mode will automatically
turn on and off depending on the time
shift status. If playable data exists on the
USB storage device registered for time
shift, “Quick start” will be automatically
set to the same status as “On”.
Off Power consumption is small during
standby.
NOTE
• You cannot select “Off” in the “Quick start” menu while
time shift is activated. Follow the on-screen instructions
to change the “Quick start” settings.
• If you want to clear the playable data, go to “HOME” >
“TV Menu” > “Setup” > “View setting” > “Time shift
setting” > “Clear the Time shift memory” (Page 47).
Individual setting — PIN
View setting
PIN
Allows you to use a PIN to protect certain settings
from being accidentally changed.
Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “Individual setting” > “PIN”.
NOTE
• PIN input is required when executing “PIN”. The default
PIN is “1234”. To reset the PIN setting (PIN input will no
longer be needed), refer to Reset the PIN (Page 67).
EWhen selecting “Yes”
Register a four-digit number to use the “PIN”
function.
1Press c/d to select “Yes”, and then press ;.
2Enter the four-digit number as a PIN using 0_9
numeric buttons.
3Enter the same four-digit number as in step 2 to
confirm.
• “The system PIN has been changed successfully”
displays.
4Press ;.
NOTE
• As a precautionary measure, make a note of your
PIN and keep it in a safe place that children cannot
reach.
• “0000” cannot be set as the PIN code.
• To view a locked channel, you must enter the PIN (see
pages 36 and 37 for locking channels from viewing in DTV,
SAT and ATV mode). When you select a locked channel,
a PIN prompt message pops up. Press 6 to display the
PIN input window.
View setting
Parental rating
This function allows DTV services to be restricted.
It prevents children from watching violent or sexual
scenes that may be harmful.
1Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “Individual setting” > “Parental rating”.
2Repeat steps 1 to 4 in when selecting “Yes” to
the left.
NOTE
• “Universal viewing” and “Parental approval pref.” are
ratings used exclusively in France.
• Refer to page 75 for details about ratings.
Individual setting — Clock
View setting
Clock setup
You can adjust the time manually and change the
clock display.
Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “Individual setting” > “Clock setup”.
Time adjustment
This function allows you to set the clock manually.
NOTE
• If you select “No”, the TV will try to get the time for the
broadcast.
Time display
This function allows you to display the clock time in
the lower-right corner of the screen.
Item
On Displays the clock time.
On (half-hourly) Displays the clock time in
30-minute increments.
Off Hides the clock time.
Time format
You can select the time format (either “24HR” or
“AM/PM”) for the clock time.
Basic adjustment