40
Optional features settings
Go to “HOME” > “TV Menu” > “Setup” >
“Option”.
Setup
Option for view
Option
3D setup
CH list
:Back:Enter
Menu
AQUOS LINK setup
Terminal setting
Selecting the picture size manually
Option
Wide mode
You can select the picture size. Selectable picture
size varies with the type of signal received.
1Go to “HOME” > “TV Menu” > “Setup” >
“Option” > “Option for view” > “Wide mode”.
• You can also select an item by pressing f on the
remote control unit.
• The menu lists the “Wide mode” options selectable
for the type of video signal currently received.
2Press a/b to select the desired item.
• As you toggle the options, each is immediately
reflected on the screen. There is no need to press
;.
Basically, if you set “WSS” to “On” in the
“Option” menu, the optimum “Wide mode” is
automatically chosen for every broadcast or
programme played using a VCR or DVD player/
recorder.
NOTE
• Even if you select your desired “Wide mode” manually,
the TV may automatically switch to the optimum “Wide
mode” depending on the signal received when “WSS” is
set to “On”.
Item (for SD [Standard-Definition] signals)
Normal Keeps the original aspect ratio in a full
screen display.
Zoom 14:9*
For 14:9 letterbox pictures. A thin
side bar appears on each side, and
you may also see bars on the top and
bottom with some programmes.
Panorama
In this mode, the picture is stretched
toward each side of the screen. The
picture may appear similar to “Full”
depending on broadcast signals.
Full For 16:9 squeeze pictures.
Cinema 16:9
For 16:9 letterbox pictures. Bars may
appear on the top and bottom with
some programmes.
Cinema 14:9*
For 14:9 letterbox pictures. Bars may
appear on the top and bottom with
some programmes.
* The items will be diplayed in ATV/DTV/SAT mode.
Item (for HD [High-Definition] signals)
Full Displays with an overscan image.
Crops all sides of screen.
Underscan
Displays with an underscan image
only when receiving a 720p signal.
Displays with the High-Definition image
adjusted optimally. Noise may appear
on the edge of the screen with some
programmes.
Dot by Dot
Displays an image with the same
number of pixels on the screen when
receiving 1080i/1080p signals only.
NOTE
• Some items do not appear depending on the type of
received signal.
• You may not be able to change the wide mode while in
3D mode.
• Refer to page 52 for PC signal inputs.
Selecting the WSS picture size
automatically
Option
WSS
The “WSS” allows the TV to switch automatically
among the different picture size.
Go to “HOME” > “TV Menu” > “Setup” >
“Option” > “WSS”.
NOTE
• Use “Wide mode” if an image does not switch to the
appropriate picture size. When the broadcast signal
contains no “WSS” information, the function will not
work even if enabled.
• This function is available for 3D images converted from
2D images or normal 2D images.
Selecting the WSS picture size manually
Option
4:3 mode
The “WSS” signal has 4:3 auto-switching that allows
you to select between “Normal” and “Full”.
Go to “HOME” > “TV Menu” > “Setup” >
“Option” > “4:3 mode”.
Item
Normal Normal range keeping 4:3 or 16:9
aspect ratio.
Full Wide image without side bars.