Sharp LC32GP3UB, LC32GP3UR manual 26

4 Press a/b to select the desired language listed on the screen, and then press ENTER.

Antenna setting

Make sure what kind of connection is made with your TV when selecting “Air” or “Cable”.

5 Press c/d to select “Air” or “Cable”. Press ENTER to enter the setting.

Channel search

Channel auto search makes the TV look for all channels viewable in the set area.

3

• If you already set the Secret No., go to step 3. If not, skip to step 4.

Input the 4-digit secret number by using 0–9.

press ENTER.

Press a/b to select “EZ Setup”, and then

1 Press MENU to display the MENU screen, and then press c/d to select “Setup”.

2

Basic adjustment settings

EZ Setup

You can run EZ Setup again, even after setting up the preset channels.

Language setting

Select from among 3 languages: English, French and Spanish.

6	When “Air” is selected in Antenna setting:
	Press c/d to select “Start”, and then press
	ENTER.
	When “Cable” is selected in Antenna
	setting:
	Press a/b to select “Analog & Digital Search
	Start” to search both analog and digital
	broadcasts or “Analog Search Start” to search
	only analog broadcasts, and then press
	ENTER.
	•	The Channel search will start automatically.
	•	To exit the Channel search screen, select “Cancel”,
		and then press ENTER.

7 Press MENU to exit.

NOTE

•If no channel is found, confi rm the type of connection made with your TV and try EZ Setup again.

•If you select “Analog Search Start” and initiate the channel search, the CH Memory for Cable Digital will be deleted.

24

Channel Setup

If initial setup does not memorize all the channels in your region, follow the instructions below to manually memorize the channels.

Antenna setting

1	Press MENU to display the MENU screen, and
	then press c/d to select “Setup”.
2	Press a/b to select “CH Setup”, and then
	press ENTER.
	• If you already set the Secret No., input the 4-digit
	secret number here. See page 43 for setting a
	secret number.
3	Press a/b to select “Air/Cable”, and then
	press ENTER.
4	Press c/d to select “Air” or “Cable”.
	Press ENTER to enter the setting.

5 Press MENU to exit.

Channel search

Channel auto search makes the TV look for all channels viewable in the set area.

1	Repeat steps 1 and 2 in Antenna setting in
	Channel Setup.
2	Press a/b to select “CH Search”, and then
	press ENTER.
3	When “Air” is selected in Antenna setting:
	Press c/d to select “Start”, and then press
	ENTER.
	When “Cable” is selected in Antenna
	setting:
	Press a/b to select “Analog & Digital Search
	Start” to search both analog and digital
	broadcasts or “Analog Search Start” to search
	only analog broadcasts, and then press
	ENTER.
	•	The Channel search will start automatically.
	•	To exit the Channel search screen, select “Cancel”,
		and then press ENTER.

4 Press MENU to exit.

NOTE

•If no channel is found, confi rm the type of connection made with your TV and try channel search again.

•If you select “Analog Search Start” and initiate the channel search, the CH Memory for Cable Digital will be deleted.