SETTING THE CLOCK (Continued)
AUTO CLOCK Setting (Continued)
| DISPLAY |
SLEEP | PIC. FLIP |
| ENTER |
MUTE | BRIGHT TV/VIDEO MENU |
ENTER/
FLASH- | a/b/c/d |
BACK |
VOL CH
MENU
5 Press a/bto move the cursor to “EDS CH SET”, and press ENTER.
6 Press c/dto select “AUTO” or “MANUAL”.
7 Press a/bto move the cursor to START, and press ENTER.
To cancel AUTO CLOCK
Press c.
If you do not know the channel that carries EDS signals in your area, select “EDS CH SET” to “AUTO” and select START. If you know the channel of the EDS signal carrier in your area, select “EDS CH SET” to “MANUAL”. Set the EDS CH and select “START”.
When set to “AUTO CLOCK”, the time is acquired automatically when MAIN POWER is turned OFF. (This function will not work when EDS CH is not set.)
AUTO CLOCK
RETURN
EDS CH SET [ AUTO ]
EDS CH [
START
ADJUST : | ENTER : ENTER | EX I T : MENU |
PLEASE WA I T
NOW SEARCH I NG T IME
STOP :
2
STEREO <ON A I R
SAP
MONO
ENGLISH
Note:
•CLOCK: The AUTO CLOCK setting may take from several minutes to an hour depending on the number of channels to receive and signal status.
•If there are no channels with EDS signals or the antenna signal is weak, the AUTO CLOCK Setting may not operate. In this case, an “EDS CH IS NOT AVAILABLE” message will display, and the MANUAL CLOCK Setting screen appears. Refer to “MANUAL CLOCK Setting” on page 26 to set the clock manually.
•If you know the Channel of the EDS signal carrier in your area, set “EDS CH SET” to “MANUAL” and select “START”. In case, the message “EDS CH (XXX) EDS DATA IS NOT AVAILABLE” displays, set “EDS CH SET” to “AUTO” when the AUTO CLOCK Setting screen appears.
•If broadcasting channels are not memorized, EDS signals cannot be received even when the “EDS CH SET” is set to “AUTO”. In this case, try EZ SETUP again. (See page 43.)
25