CONNECTION SYSTEM WITH VARIOUS WAYS OF BEING USED (Continued)

Monitor Output for Picture and Sound Output from AV-IN2/OUT Terminal

It is possible to output picture and sound being received by this unit from the AV-IN2/OUT terminal of the Wireless Center.

ENGLISH

To Videoinput terminal (Yellow)

Wireless Center

IN

AV-IN2

 

MONITOR

 

AV-IN3

AV-IN1

AV-IN1

/OUT

OUT

 

 

(Yellow)

 

VIDEO

ANT.(White)

AUDIO

 

 

L

IR

POWER FACTORY

(Red)

OUT

DC12V

 

INPUT SERVICE

OUT

AUDIO

R MONITOR

 

OUT

 

S-VIDEO

To AV-IN2/OUT terminal

Audio/Video cord

To audio input terminal

(commercially available)

(White)

 

(Red)

When connecting to amplifier or stereo, etc.

Note:

•Pictures and sound you have recorded cannot be used without permission from the copyright owner, other than for personal enjoyment.

•Transmission of pictures and sound from the Wireless Center to the main unit may take some time. For this reason, a picture that is slightly delayed from the actual picture is displayed on the main unit. When recording pictures and sound on DVD or video while watching the main unit, it will take about one second from pressing the picture record button on the remote control until actual picture recording starts.

•When recording pictures or watching pictures on another device via the AV-IN2/OUT terminal of the Wireless Center, “AV2-IN/OUT” is set to “OUT ”.

If the television power supply is switched “off” using the remote control when the “AV2-IN/OUT” is set to “OUT ”, the power supply of the Wireless Center is also put into a standby state, but output from the AV-IN2/OUT terminal continues as is. Therefore, if the main power supply of the Wireless Center is switched off, output from the AV-IN2/OUT terminal stops.

* In the following cases, the power supply is in a standby state, but output from the AV-IN2/OUT terminal is possible.

•When television main power is “off”.

•When the power supply button of the remote control is “off”.

•Also in cases when communication is not possible due to some fault, output from the AV-IN2/OUT terminal is interrupted. For the purpose of power conservation, when output from the AV-IN2/OUT terminal is not being used, it is recommended that the main power of the Wireless Center be turned off.

* Even if the main power of the Wireless Center is turned off, the antenna output and video 1 are output.

61