Main unit (rear view)
Rear Speaker (woofer)
Stand
Rear terminal section
Can also be used as video output terminals.
AV 2 IN/OUT |
|
|
| AV 1 IN |
|
| POWER | |
AUDIO | VIDEO |
| AUDIO | VIDEO | COMPONENT |
| INPUT | |
R | L | R | L |
| Y | PB(CB) | PR(CR) | DC13V |
AUDIO | AUDIO | POWER INPUT | ||
VIDEO | VIDEO | COMPONENT | ||
DC13V | ||||
AV 2 IN/OUT |
| AV 1 IN |
|
Removing Back Cover
■ When connecting the cords to the terminals, remove the back cover by gently pulling the part marked
forward.
■To replace the back cover, first fit the four top clips (1) into the
corresponding slots of the terminal section, and then align the four side clips (2) with the corresponding slots. Then, press the marked parts (3) until the two hooks on the bottom of the cover lock in place with a click.
Caution!
Before using the LCD AV monitor, be sure to remove the protection tape and sheet from the back cover.
protection tape and sheet
10