BASIC OPERATION

Turning on MAIN POWER

Control section of main unit

POWER indicator

MAIN POWER

1

Press MAIN POWER, located on the

▼ On-screen display

2

front side of the main unit.

AV1

The POWER indicator

N358

 

instantaneously changes from red to

 

 

green and the main unit is turned on.

 

Notes:

■When the POWER indicator is red, press ON/OFF on the remote control to turn on the monitor.

The POWER indicator changes from red to green.

■The input mode indication disappears after five seconds.

Switching the AV INPUT [AV1/AV2] Mode

ON/OFF

MUTE

ON/OFF

MENU

AV INPUT

AV INPUT

SELECT

VOL

VOL

 

SELECT

LCD MONITOR

1 Turn on the power of the connected video equipment.

2 Press AV INPUT and select the applicable input source. The screen displays AV1 or AV2 mode at the upper right corner each time AV INPUT is pressed.

Note:

■The AV input mode indication remains for five seconds.

•AV1: Select AV1 when video equipment is connected to the AV 1 IN terminals. The display of the AV1 mode indicates either AV1 or COMPONENT depend- ing on the adjustment of the SET UP settings.

AV1 is displayed when AV1 is set to NORMAL in the SET UP settings, and COMPONENT is displayed when AV1 is set to COMPONENT.

(see page 18)

•AV2: The AV2 mode can be set to either IN or OUT in the SET UP settings.

(see page 18)

AV2 indication is not displayed when the mode is selected to OUT.

Initial mode (AV1)

AV1 mode

AV1

AV2 mode

AV2

12