Watching TV

Changing channels-Air/Cable

You can change channels in several ways by pressing AIR or CABLE to select the antenna and then following one of the methods below .

Method 1

Using CHr/son the remote control unit or on the TV.

Method 2

1.Press FLASHBACK to switch to the previously tuned channel.

2.Press FLASHBACK again to switch back to the currently tuned channel.

NOTE

•FLASHBACK will not work if no channel has been changed after TV is turned on.

Method 3

Using remote control buttons 0–9, • (DOT) to select

channels for VHF/UHF/CATV/DIGITAL.

To select a 1 or 2-digit channel number (e. g., Channel 5):

Press 5sENT

Air

Air

ANALOG

55

NOTE

•When selecting a 1-digit channel number, it is not necessary to press 0 before the number.

•When you enter 0–9only, channel selection will be made if there is no operation for a few seconds.

To select a 3-digit channel number (e. g., Channel 115):

Press 1s1s5

Cable

Cable

Cable ANALOG

1

11

115

To select a 4-digit channel number (e. g., Channel 22.1):

Press 2 s2s• (DOT) s1sENT

Air

Air

Air

Air

Air

DIGITAL

2

 

22

22.

22.1

22.1

NOTE

•When you enter 0–9only, channel selection will be made if there is no operation for a few seconds.

•If you push “0” by itself, nothing will happen.

•Complete the above steps within a few seconds.

•When you enter 0–9and • (DOT), channel selection will be made if there is no operation for a few seconds.

16