QUICK REFERENCE
QUICK INSTALLATION TIPS
1 Attach your antenna to the back of the AQUOS television. (See page 7.)
2 Connect the AC plug for the AQUOS television into the AC outlet.
AC outlet
•Place the TV close to the AC outlet, and keep the power plug within reach.
•TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH
3 Place the Ferrite core in the space indicated in the below fi gure and bundle the cords properly with the cable clamp and the cable tie.
Ferrite core
4 How to turn on the AQUOS television for the fi rst time. A) Press POWER on the AQUOS television.
POWER
B)The POWER indicator on the front of the AQUOS television lights GREEN.
POWER
indicator
•Speakers cannot be detached from the TV.
•TV angle cannot be adjusted.
Using the Remote Control Unit
Use the remote control unit by pointing it towards the remote control sensor on the TV. Objects between the remote control unit and the remote control sensor may prevent proper operation.
Remote Control sensor
30º
17´ (5 m)
30º 
30º
■Cautions regarding the remote control unit
•Do not expose the remote control unit to shock. In addition, do not expose the remote control unit to liquids, and do not place in an area with high humidity.
•Do not install or place the remote control unit under direct sunlight. The heat may cause deformation of the remote control unit.
•The remote control unit may not work properly if the remote control sensor on the TV is under direct sunlight or strong lighting. In such cases, change the angle of the lighting
or the TV, or operate the remote control unit closer to the remote control sensor.
30º
IMPORTANT:
The POWER indicator on the AQUOS television should light GREEN indicating you have power to the AQUOS television.
If the POWER indicator on the AQUOS television still does not light up, press TV POWER on the remote control to turn the power on.
IMPORTANT:
IF THE UNIT DOES NOT POWER ON - UNPLUG THE AQUOS TELEVISION FROM THE OUTLET AND REPEAT THE INSTALLATION STEPS.
IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT
6