Basic adjustment settings
Antenna Setup – DIGITAL – Air
1 Repeat steps 1 to 3 in Antenna setting in Channel Setup.
2 Press a/bto select “CH Memory”, and then press ENTER.
3 Press a/bto select ANALOG and DIGITAL (Air), and then press ENTER.
4 Perform the following steps after confirming the type of antenna connection made with your TV, and the channel type selected in Step 3.
When viewing ANALOG broadcasts:1Press a/b, and then press c/d to select the channel to skip or not.
2Press a/bto select “Skip”, and then press c/dto select “On” or “Off”.
When viewing DIGITAL broadcasts:1Press a/bto select the channel to skip or not, and then press c/d to select “On” or “Off”.
•On: Skips channels. (Channel selection disabled using CHr/s.)
•Off: Does not skip channels. (Channel selection enabled using CHr/s.)
NOTE
• Make sure what kind of connection is made with your TV.
In order to receive digital air broadcasts, you need a digital broadcast antenna. You can confirm the antenna configuration through the “Antenna Setup - DIGITAL” screen.
If necessary, adjust the direction of the antenna to obtain the maximum signal strength.
Signal Strength1 Press MENU and the MENU screen displays.
2 Press c/dto select “Setup”.
3 Press a/b to select “Antenna Setup - DIGITAL”, and then press ENTER.
•If you already set the Secret No., input the 4- digit secret number here. See page 46 for setting a secret number.
4 Press a/bto select “Signal Strength”.
•The signal strength of the DIGITAL (Air) antenna is displayed. The signal information is based on the current channel.
Signal Strength
Channel Strength
Signal Strength
Current | 0 | Max | 0 |
|
|
|
|
•The channel signal strength can also be checked separately.
1Repeat steps 1 to 3 in Signal Strength in Antenna Setup - DIGITAL - Air.
2Press a/bto select “Channel Strength”, and then press ENTER.
3Input the
•Make sure the appropriate signal strength of each channel received is obtained.
Signal Strength
Channel Strength
1 2 CH
Signal Strength
Current | 0 | Max | 0 |
|
|
|
|
21