Useful adjustment settings
Input Select | DVI input signal setting |
1
2
3
Press INPUT to select INPUT5.
Press MENU and the MENU screen displays.
Press c/dto select “Option”.
INPUT button
Use this menu to select the input source.
1 Press INPUT.
• A list of selectable sources appears.
2 Press INPUT again to select the input source.
•An image from the selected source automatically displays.
•You can also select the input source by pressing a/b.
•If the corresponding input is not plugged in, you cannot change the input. Be sure to connect the equipment beforehand.
Selecting input signal typeFor setting the signal type of external equipment connected to INPUT 1, 2 or 5 terminals.
1 | Press MENU and the MENU screen displays. |
2 | Press c/dto select “Option”. |
3 | Press a/bto select “Input Select”, and then |
| press ENTER. |
4 | Press a/bto select a signal type you want |
| to set, and then press ENTER. |
• If the selected signal type is incorrect, images are not displayed or displayed without any color.
NOTE
•If you set INPUT1 and INPUT2 to Auto, the TV will automatically select the input signal.
•Check the operation manual of the external equipment for the signal type.
•Setting INPUT 1 and INPUT 2 signal selection to “Auto” when other equipment is connected will result in the following connectivity priority.
INPUT 1 and INPUT 2
1.COMPONENT VIDEO
2.VIDEO
4 Press a/bto select “Input Select”, and then press ENTER.
MENU [Option ... Input Select] | |
Option |
|
Audio Only |
|
Input Select | [ANALOG PC] |
Output Select | [Fixed] |
Quick Shoot | [Off] |
5 | Press a/b to select the equipment | |||
| connected to INPUT 5 terminal, and then | |||
| press ENTER. | |||
|
|
|
| |
| MENU [Option ... Input Select] | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| DIGITAL PC |
|
|
|
|
|
|
|
|
| ANALOG PC |
|
|
|
|
|
|
|
|
| DIGITAL AV |
|
|
|
|
|
|
|
|
| ANALOG AV |
|
|
|
|
|
|
|
|
|
|
|
|
37