Sharp LC 42SB45U Direct Button Operation, Changing Channels, Changing Volume, Press Input

Direct Button Operation

Changing Channels

You can change channels by pressing CH +/- or 0-9, or • (DOT).

Examples:

To select a 1 or 2-digit channel number (e. g., Channel 5):

Press 5 ENT.

To select a 3-digit channel number

(e. g., Channel 115):
Press 1	1	5	ENT.

To select a 4-digit channel number

(e. g., Channel 22.1):
Press 2	2	• (DOT)	1
ENT.

•• When selecting a 1-digit channel number, it is not necessary to press 0 before the number.

Changing Volume

You can change the volume by pressing VOLk/l on the TV or on the remote control unit.

•To increase the volume, press VOLk.

•To decrease the volume, press VOLl.

INPUT

To view external source images, select the input source using INPUT on the remote control unit or INPUT on the TV.

111 Press INPUT.

•A list of selectable sources appears.

222Press INPUT again to select the input source.

•An image from the selected source automatically displays.

•Each time INPUT is pressed, the input source toggles.

•If you press a/b to select the input source, press Enter to confirm your selection.

•• See page 17-18 for external equipment connection.

MUTE

Mutes the current sound output. Press MUTE.

•• Mute can be canceled by using the method below.

-Mute will be canceled if you press VOL+/- or MUTE.

SLEEP

Allows you to set a time when the TV automatically switches to standby.

Press SLEEP.

•The remaining time displays when the sleep timer has been set.

•Each time you press SLEEP, the remaining time switches as shown below.

Off, 10, 20, 30, 40, 50, 60, 90, 120

•When set, the time automatically starts counting down.

•If you want to adjust the sleep timer, you can press SLEEP twice then change the time setting.

•One minute before the time expires, the remaining time displays every second.

•• Select "Off" by pressing SLEEP to cancel the sleep timer.

•• The TV will enter standby mode (power indicator lights red) when the remaining time reaches zero.

21