Useful adjustment settings
Auto Sync. adjustment (PC input mode only)
For automatically adjusting the PC image.
Fine Sync. adjustment (PC input mode only)
Ordinarily you can easily adjust the picture as necessary to change image position using Auto Sync. In some cases, however, manual adjustment is needed to optimize the image.
1 Press MENU and the MENU screen displays.
2 Press c/dto select “Setup”.
1 Press MENU and the MENU screen displays.
2 Press c/dto select “Setup”.
3 Press a/bto select “Auto Sync.”, and then press ENTER.
4 Press c/dto select “Yes”, and then press
ENTER.
•Auto Sync. starts and “Now adjusting the image” displays.
NOTE
•When Auto Sync. is successful, “Auto Sync completed successfully” displays. If not, Auto Sync. failed.
•Auto Sync. may fail even if “Auto Sync completed successfully” displays.
•Auto Sync. may fail if the computer image has low resolution, has unclear (black) edges, or is moved while executing Auto Sync.
•Be sure to connect the PC to the TV and switch it on before starting Auto Sync.
3 Press a/bto select “Fine Sync.”, and then press ENTER.
4 Press a/bto select the specific adjustment item.
5 Press c/dto adjust the item to your desired position.
NOTE
•For resetting all adjustment items to the factory preset values, press a/b to select “Reset”, and then press
ENTER.
Selected item | Description | |
|
| |
Centers the image by moving it to the left | ||
or right. | ||
| ||
|
| |
Centers the image by moving it up or | ||
down. | ||
| ||
|
| |
Clock | Adjust when the image flickers with vertical | |
| stripes. | |
|
| |
Phase | Adjust when characters have low contrast | |
| or when the image flickers. | |
|
|
34