Other viewing options

Picture and still image

You can display two same-sized pictures – one moving and one still.

1 Press FREEZE.

• A moving image displays on the left screen and a still image displays on the right screen. The still image is one frame captured from a moving image at the moment you press FREEZE.

FREEZE

2 Update the still image by pressing ENTER.

•Each time you press ENTER, the image on the right screen updates.

3 Press FREEZE to exit still image.

NOTE

•This function does not work in INPUT 4 (HDMI) and INPUT 5 (DVI-I).

•When this function is not available, “No displaying still image available.” will display.

•The still image automatically goes out after 30 minutes.

•If you are using FREEZE and a broadcast activates the V-CHIP BLOCK, FREEZE will cancel and a block message will appear.

Presetting remote control function

You can operate the connected AV products (AV Receiver, Cable Box, SAT tuner, DTV, VCR, DVD, LD) using the presetting manufacturer function for your remote control unit.

Presetting manufacturer codes

1 Press FUNCTION until the LED for your device lights up.

2 After the LED for your device lights up, if you press FUNCTION and DISPLAY and enter the code registration mode, the LED will blink.

3 Press 0 – 9 to enter the manufacturer code. (See page 51.)

•Preset mode is finished once the LED no longer lights up.

4 After registering the code, the LED will stop blinking then turn off after one second. (If you perform an incorrect operation, the LED will blink quickly then turn off.)

50