Sharp MD-MT88H „To prevent recorded MiniDiscs from, being erased accidentally, 01/4/4 88UK 3.fm

Models: MD-MT88H

1 52
Download 52 pages 12.2 Kb
Page 15
Image 15
„To prevent recorded MiniDiscs from

To prevent recorded MiniDiscs from

being erased accidentally

Slide the accidental erase prevention tab, located on the side of the MiniDisc, in the direction indicated by the arrow.

The MiniDisc will then be protected against accidental erasure.

To add a recording to such a MiniDisc, slide the acciden- tal erase prevention tab back to its original position.

Helpful tip when attaching a label

When attaching a label to an MiniDisc cartridge, be sure to note the following. If the label is not attached properly, the MiniDisc may jam inside the unit and it may not be possible to remove it.

zIf the label peels off or partially lifts away, replace it with a new one.

zDo not put a new label on top of an ex-

isting one.

z Attach the label only in the specified location.

About sampling rate converter

This portable MD incorporates a sampling rate converter meaning it can record from digital radios or DAT tape recorders.

Note for digital recording

You cannot copy a MiniDisc that you recorded from digital inputs to another MiniDisc or DAT. It is prevented by the SCMS (Serial Copy Management System). Recording from analogue inputs is not affected.

Digital signals

Digitally recorded Cannot record

 

MiniDisc

Basic Operation -Recording-

Web-site:www.sharp.co.uk/support Help Line: 08705 274277 (office hours)

15

01/4/4 88UK_3.fm

Page 15
Image 15
Sharp MD-MT88H „To prevent recorded MiniDiscs from, being erased accidentally, „Helpful tip when attaching a label