18
ConguretheoutputsettingsforcopiesusingSort,Group,Offset,Staple,Punch,orFold.
Basic operations
1 Select [Output] 2 Copy output settings 3 Check the preview image 4 Start
(Black & white, or colour)
1 Specify the output tray2 Select the output and paper output type3 Specify the details of output modeCOPY OUTPUT
Output tray settings
Specify the destination to output copies.
The output tray currently selected is indicated by an arrow.
(When a nisher (100-sheet stapling) or saddle nisher
(100-sheet stapling) is installed)
The [Middle Tray] key can be selected.
Outputs to the offset tray
Outputs to the right tray
If the offset, staple sort, saddle stitch, fold, or
punchfunctionisspecied,therighttrayisnot
available. Offset function
(When a nisher or saddle nisher is installed)
Select this function when you wish to output copies while shifting
them set by set.
Selecting the staple function clears the Offset checkmark
automatically.
Sort/Group function
This function sets the sorting method when copying a scanned
original.
Sorts the scanned original on a set basis, and
outputs them
Groups the scanned original on a page basis,
and outputs them.
Sort staple
(When a nisher or saddle nisher is installed)
This function staples the output copies and deliver them to the tray.
1 staple in back
1 staple in front
2 Staples
Copies can be folded at the centre, stapled,
and output.
This function is only available when a saddle
nisherisinstalled.

Output tray settings