Sharp PG-D40W3D specifications Save Settings and Quit, Quit without Saving Set, SSave & Quit

Setting up the Projector Using RS-232C or Telnet

Save Settings and Quit

([S]Save & Quit)

Save set values and quit menu.

▼SETUP MENU

----------------------------	SETUP MENU---------------------------
[1]IP Address	[2]Subnet Mask	[3]Default Gateway
[4]User Name	[5]Password
[6]RS-232C Baud Rate	[7]Projector Name [8]DHCP Client
[A]Advanced Setup		[D]Disconnect All
[V]View All Setting	[S]Save & Quit	[Q]Quit Unchanged
setup>s		1
All Connection will be disconnect.
Continue(y/n)? y		2
Apply New setting...Done.

Quit without Saving Set-

tings ([Q]Quit Unchanged)

Quit menu without saving setting values.

▼SETUP MENU

----------------------------	SETUP MENU---------------------------
[1]IP Address	[2]Subnet Mask	[3]Default Gateway
[4]User Name	[5]Password
[6]RS-232C Baud Rate [7]Projector Name		[8]DHCP Client
[A]Advanced Setup		[D]Disconnect All
[V]View All Setting	[S]Save & Quit	[Q]Quit Unchanged
setup>q		1
Quit Without Saving(y/n)? y		2
Setting Unchanged.

1 Enter “s” and press the “Enter” key.

2 Enter “y” and press the “Enter” key.

1 Enter “q” and press the “Enter” key.

2 Enter “y” and press the “Enter” key.

-25