![](/images/new-backgrounds/1165833/16583359x1.webp)
Setting up the Projector Using
Setting of Search Port
(ADVANCED[0]Search Port)
Sets the port number used when searching for the projector from the network.
advanced>0 |
|
| 1 | |
Please Enter Port Number for Search from Computer. |
|
| ||
Valid range | : 1025 to 65535 |
|
| |
Search Port | : 5006 |
| 2 | |
Please Enter | : 5004 |
| ||
(change) |
|
|
| |
| * | |||
|
|
|
1 Enter “0” and press the “Enter” key.
2 Enter numerical value and press the “Enter” key.
Display set numerical value (*).
Return to Main Menu
(ADVANCED[Q]Return to Main
Menu)
Returns to the main SETUP MENU.
advanced>q |
| 1 |
SETUP | ||
[1]IP Address | [2]Subnet Mask | [3]Default Gateway |
[4]User Name | [5]Password |
|
[8]DHCP Client | ||
[A]Advanced Setup |
| [D]Disconnect All |
[V]View All Setting | [S]Save & Quit | [Q]Quit Unchanged |
setup> |
|
|
1 Enter “q” and press the “Enter” key.
Returns to the SETUP MENU.
Note
•Set according to need. Normally, use with the factory default setting.
Return to Default Settings
(ADVANCED[!]Restore Default
Setting)
Returns all menu setting values to the default state.
advanced>!
Restore All Setting to Default(y/n)? y
— User Setting Initialized —
1
2
1 Enter “!” and press the “Enter” key.
2 Enter “y” and press the “Enter” key.
Note
•If the values for IP Address, Subnet Mask or Gateway of the projector have been returned to the default settings via Telnet, the computer cannot be connected to the projector depending on the computer's network settings.
-30