4.Adjust the projected image with the Setup Guide

1After the projector turns on, the Setup Guide appears. (When “Setup Guide” is set to “On”. See page 42.)

2Follow the steps in the Setup Guide and adjust the focus, picture size, and height (angle).

3After adjusting the focus, height (angle) and picture size, press ENTER to finish the Setup Guide.

_PP. 26, 27

5. Correct trapezoidal distortion

Correcting trapezoidal distortion using Keystone Correction.

On the projector

Shrinks

Shrinks

upper side.

lower side.

On the remote control

_P. 28

6. Select the INPUT mode

Select the “COMPUTER” using INPUT on the projector or COMPUTER on the remote control.

Start Quick

On the On the remote projector control

INPUT listOn-screen display (RGB)

INPUT

COMPUTER

COMPUTER

RGB

1024 ⋅ 768

 

DDVI-D Computer

DDVI-D Video

•When you press INPUT on the projector, the INPUT list appears. Press '/" to switch the INPUT mode.

_P. 29

7.Turn the computer on8.Turn the power off

Press STANDBY/ON on the projector or STANDBY on the remote control, and then press the button again while the confirmation message is displayed to put the projector into standby mode.

On the

On the remote

On-screen display

 

projector

control

 

_P. 25

17