Operating with the Remote Control

BREAK TIMER button

POINTER button

SPOT button

Adjustment buttons (P/R/O/Q)

Displaying the Pointer

1 Press POINTER and press P/R/ O/Qon the remote control to move the pointer.

2 Press POINTER again.

• The pointer will disappear.

ECO+QUIET button

Displaying and Setting the Break Timer

1 Press BREAK TIMER.

•The timer starts to count down from 5 minutes.

On-screen display

Press P/R/O/Q to adjust the

2 length of the break time.

•Increases with Por Q

5 minutes s6 minutes s60 minutes

•Shortens with Oor R

4 minutes s3 minutes s1 minute

•The break time can be set in units of one minute (up to 60 minutes).

Canceling the break timer display function

Press BREAK TIMER.

Note

•Break Timer does not function while the pro- jector is operating the “Auto Sync”, “FREEZE” or “AV MUTE” functions.

Using the Spot Function

1

 

 

Press SPOT and press P/R/O/Q

 

 

on the remote control to move the

 

 

 

spot area.

 

 

2

 

 

Press SPOT again.

 

 

 

 

• The spot area will disappear.

Switching the Eco+Quiet Mode

Press ECO+QUIET on the remote control or on the projector to switch the Eco+Quiet mode between on and off.

•When the Eco+Quiet Mode is set to “ON”, the sound of the cooling fan will turn down, the power consumption will decrease, and the lamp life will extend.

Note

•Refer to “Lamp Setting” on page 40 for de- tails of the Eco+Quiet mode.

32