Basic Operation
2
5
1
3
4
5. BRIGHT +/- (Backlight adjustment)
Pressing 
or 
displays the BRIGHT menu when the menu screen is not displayed.
B R I G H T | 15 |
|
|
Press 
or 
to adjust the brightness.
*If you do not press any buttons for about 4 seconds, the BRIGHT menu automatically disappears.
ENGLISH
7 
6 8
1. INPUT (Input mode selection)
The menu is displayed. Press 
or 
to select the input
mode, and press 
to enter.
*You can select the input terminal by pressing the input switch of the monitor.
Input mode | Video | Audio | |
PC1 DIGITAL*1 | PC1 input terminal | PC audio input | |
PC2 ANALOG | PC2 input terminal | ||
terminal | |||
PC3 ANALOG*2 | PC3 input terminals | ||
| |||
AV1 DIGITAL*1 | AV1 input terminal | AV audio input | |
AV2 COMPONENT*2 | AV2 input terminals | ||
terminals | |||
AV3 VIDEO | AV3 input terminal | ||
|
*1 Select the terminal for DVI SELECT. (See page 19.) *2 Select the terminal for BNC SELECT. (See page 19.)
2. MUTE
Turns off the volume temporarily.
Press the MUTE button again to turn the sound back to the previous level.
3. MENU
Displays and turns off the menu screen (see page 17).
4. VOL +/- (Volume adjustment)
Pressing 
or 
displays the VOLUME menu when the menu screen is not displayed.
V O L U M E | 15 |
|
|
Press 
or 
to adjust the volume of the sound.
*If you do not press any buttons for about 4 seconds, the VOLUME menu automatically disappears.
6.SIZE (Screen size selection)
The menu is displayed.
Press 
or 
to select the screen size. (See page 16.)
7.DISPLAY
Displays monitor information. The display disappears when this button is pressed again or disappears automatically after approximately 15 seconds.
INFORMATION | XXXX/XX/XX XXX XX:XX:XX | |
INPUT MODE | : | PC2 ANALOG |
SIZE | : | WIDE |
COLOR MODE | : | STD |
BRIGHT | : | 15 |
VOLUME | : | 15 |
ID No. | : | 0 |
MODEL | : | |
S/N | : |
|
1 0 2 4 x 7 6 8 | V: 60 Hz H: 48.4 kHz | |
|
|
|
8. MODE (Color mode selection)
Each time you press this button, the color mode changes in the following order:
STD (Standard) → VIVID → sRGB → STD...
•sRGB applies to PC input only.
sRGB is international standard of color representation specified by IEC (International Electrotechnical Commission). Color conversion is made in taking account of liquid crytal’s characteristics and represents color tone close to its original image.
15 E