53 E
Specications

nProduct Specications

Model PN-L802B
LCD component 80" Class [80 inch (203.2cm) diagonal] TFT LCD
Max. resolution (pixels) 1920 x 1080
Max. colors Approx. 1.06 billion colors
Pixel pitch 0.923 mm (H) × 0.923 mm (V)
Viewing angle 160° right/left/up/down (contrast ratio ≥ 10)
Screen active area inch (mm) 69-3/4 x 39-1/4 (1771.2 x 996.3)
Computer input signal
Digital (DVI 1.0 standard-compliant), Analog RGB (0.7 Vp-p) [75 Ω]
Sync signal Horizontal/vertical separate (TTL: positive/negative), Sync-on-green,
Composite sync (TTL: positive/negative)
Video color system NTSC (3.58MHz)/NTSC (4.43MHz)/PAL/PAL-60/SECAM
Plug and play VESA DDC2B
Power management VESA DPMS, DVI DMPM
Input terminals PC/AV Digital HDMI x 1
PC Analog Mini D-sub 15 pin, 3 rows x 1
Audio 3.5 mm mini stereo jack x 1
Serial (RS-232C) D-sub 9 pin x 1
When PN-ZB01
(optional) is
attached
PC/AV Digital DVI-D 24 pin (HDCP compatible) x 1
PC Analog BNC *1*2 x 1
AV Composite video BNC x 1
S-video x 1
Component BNC (Y, Cb/Pb, Cr/Pr) *1 x 1
Audio RCA pin (L/R) x 2
Output terminals Audio RCA pin (L/R) x 1
Serial (RS-232C) D-sub 9 pin x 1
When PN-ZB01
(optional) is
attached
PC/AV Digital DVI-D 24 pin x 1
External speaker 7 W + 7 W [6 Ω]
LAN terminal
[When PN-ZB01 (optional) is attached]
10 BASE-T/100 BASE-TX
Speaker output 7 W + 7 W
Touch Panel Detection method Infrared camera method
Detection area inch (mm) 69-3/4 x 39-1/4 (1771.2 x 996.3)
PC connector USB (1.1 compliant)
Power supply Supplied from USB
Touch pen Ultrasonic communication method
Power requirement AC 100 V - 240 V, 2.9 A, 50/60 Hz
Operating temperature *3*441°F to 95°F (5°C to 35°C)
Operating humidity*420% to 80% (no condensation)
Power consumption
(Maximum / input signal waiting mode *5 / standby
mode *6)
255 W / 1.0 W / 1.0 W
Power consumption
[When PN-ZB01 (optional) is attached]
260 W
Dimensions (excluding protrusions) inch (mm) Approx. 74 (W) x 5-5/16 (D) x 45-9/16 (H) (1880 x 135 x 1157)
Weight lbs. (kg) Approx. 224.9 (102) (excluding the temporary stand)
Weight [PN-ZB01 (optional)] lbs. (kg) Approx. 1.102 (0.5)
*1 Cannot be used simultaneously.
*2 Does not support plug and play.
*3 Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP.
In such cases, please check the temperature condition specied by the optional equipments.
*4 In addition, check the requirements of the computer and other devices to be connected, and make sure that all requirements are satised.
*5 When AUTO INPUT CHANGE is set to OFF.
*6 When STANDBY MODE is set to STANDARD. When STANDBY MODE is set to LOW POWER: 0.5 W
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specication changes for product improvement
without prior notice. The performance specication gures indicated are nominal values of production units. There may be some deviations from
these values in individual units.