42
E
Others
Function
Command Direction
Parameter Reply Control/Response contents *1 *2
(A) (B)
SCREENSIZE(PC) WIDE WR 1-5 1-5 1:WIDE,2:NORMAL,3:DotbyDot,4:ZOOM1,5:ZOOM2 ○

○ ○

SCREENSIZE(AV) WIDE WR 1-5 1-5 1:WIDE,2:ZOOM1,3:ZOOM2,4:NORMAL,5:DotbyDot ○
VOLUME VOLM WR 0-31 0-31 ○
MUTE MUTE WR 0-1 0-1 0:OFF,1:ON -
INFORMATION MODEL INF1 RValue ●
SERIALNO SRNO R Value
BRIGHT VLMP WR 0-31 0-31 ○
TEMPERATURESENSOR DSTA R0Internal temperature normal
●
1Internal temperature abnormal has occurred and the monitor is in
standby mode
2 Internal temperature abnormal occurred (To delete the information of
temperature abnormal, turn off the main power.)
3 Internal temperature abnormal has occurred and backlight brightness is
dimmed
4 Temperature sensor abnormal
TEMPERATUREACQUISITION ERRT RValue Temperatureattemperaturesensors1through3arereturnedinthe
following forms:
[Sensor1],[Sensor���2],[Sensor3]
Indicatesatemperaturesensorabnormalitywhen“126”isreturned.
○
CAUSEOFLASTSTANDBYMODE STCA W 0 Initialization
●
R0No detectable error has occurred
1 StandbymodebyPOWERbutton
2 Main power off by the main power switch
3StandbymodebyRS-232CorLAN
4 Input signal waiting mode by No Signal
6 Standby mode by abnormal temperature
8StandbymodebySCHEDULEsetting
20 StandbymodebyOFFIFNOOPERATIONsetting
Commands for setting of the GAMMA user data
Function
Command Direction
Parameter Reply Control/Response contents *1 *2
(A) (B)
REDGAMMADATATRANSFER UGRW W aaxxxx ··· xxxxcc
(xxxx: 32 pieces)
aa:01-16
xxxx:0000-1023
cc:00-FF
aa:Blocknumber
xxxx: 32 pieces of user data
cc:Checksum(ASCIIdata)oftheblocknumberanduserdata

○ ○ ○

GREENGAMMADATATRANSFER UGGW W
BLUEGAMMADATATRANSFER UGBW W
REDGAMMADATAREAD UGRR W 1-16 xxxx ··· xxxx
(xxxx: 32 pieces)
xxxx:0000-1023
xxxx: User data of 32 pieces
GREENGAMMADATAREAD UGGR W 1-16
BLUEGAMMADATAREAD UGBR W 1-16
USERDATAINITIALIZE UGRS W 0 Initializetheuserdata.
USERDATASAVE UGSV W 0 Save the user data in the monitor.
Controlling the Monitor with a PC (RS-232C)