Fujitsu C145-C037-01EN manual Character Plotting Commands, Char Function, Etx, Del

SM	Symbol mode on/off. Plot the specified character (marker) at each end of vectors.
SP	Select a logical pen.
SV	Specify the screened vector, or the type of a image pattern imposed on lines.
TR	Transparency mode on/off. With mode on, the background is visible through
	blank areas of the foreground.
UL	User-defined line type. Create a type of line which is substituted for a line type
	defined by the LT command.
WU	Select the unit of pen width for the PW command.
Character Plotting Commands
AD	Define characteristics of the alternate font.
CF	Specify an outline character fill mode and whether or not characters are to be
	edged (outlined).
CP	Character plot. Move the logical pen by the specified numbers of character cells
	(character spaces and lines).
DI	Set the direction (inclination) of characters relative to the absolute plotter
	coordinates.
DR	Set the direction (inclination) of characters relative to the scaling points P1 and
	P2.
DT	Define a terminator character that specifies the end of printing a character string
	in label mode.
DV	Define variable text path. Set the plotting direction of a character string in 90
	degrees and set the direction of line feeding.
ES	Extra spaces. Increase or decrease the character spacing and line spacing.
FI	Font primary. Specify the font, to which the font ID is assigned in PCL mode,
	as the standard font.
FN	Font secondary. Specify the font, to which the font ID is assigned in PCL mode,
	as the alternate font.
LB	Label mode. Plot a character string using the current active font.
	The following control characters are available. Other characters are NOP
	commands.
		Char	Function
		ETX	Default of terminator character
		BS	Back space
		HT	Double space
		LF	Line feed
		CR	Carriage return
		SO	Alternate character set selection
		SI	Standard character set selection
		SP	Space
		DEL	Space
LO	Label origin.		Move the origin of plotting a character string in label mode.

5-27