1.6Wide Variety of Interfaces and Emulations

The PrintPartner 20W comes standard with two bidirectional Centronics parallel interfaces (IEEE1284 TYPE-B and TYPE-C connectors) and an RS-232C serial interface (D-SUB 9-pin connector). Three optional interface boards, LocalTalk (AppleTalk compatible), Ethernet (TCP/IP, IPX/SPX, and EtherTalk corresponding), and IrDA (infrared adapter), are offered.

The PrintPartner 20W comes standard with the HP LaserJet 5 emulation and the PostScript level 2 compatible emulation.

An interface board slot and an emulation card connector are provided. Figure 1.3 shows installation of an interface board and an emulation card. No emulation card is planned presently.

Optional

Emulation card

interface

 

board

 

Standard interface connectors

Bottom connector

Figure 1.3 Optional interface and emulation

1.7Environment Friendly

The PrintPartner 20W uses a toner recycle mechanism that does not generate toner waste. This means that the printer uses toner effectively and the operator does not need to deal with wasted toner.

The power-saving design (intelligent heater on/off sensing) reduces power consumption.

Ozone emission is low.

Plastic parts are marked with the plastic content for ease of product recycling.

The user-selectable economy mode extends the lifetime of the toner bottle.

1-5

Page 15
Image 15
Fujitsu C145-C037-01EN manual Wide Variety of Interfaces and Emulations, Environment Friendly