3-4
Specification
Printing with 1st paper tray 50 dBA or less
with 2nd/3rd paper tray (incl duplex print) 52 dBA or less
with 4th paper tray (incl duplex print) 54 dBA or less
Reference: with multi-function feeder 53 dBA or less
Standby mode 40 dBA or less
0.08 ppm or less (within 28 m2 tightly-closed environment, 6 hours
printing, 25˚C 50%RH)
According to UL478 Section 45 test procedure
Density Screen Level OD ratio: 0.9 or more
Difference OD ratio: 0.3 or less
Resolution The following vertical line and horizontal line are
discernible.
600 dpi: 2-dot line/3-dot space
1200 dpi: 4-dot line/5-dot space
Fusibility 75% or more (average of 9 points of OD ratios per
sheet, room temperature and humidity, tape peeling
method, recommended paper)
Dot pitch Main scan direction: ±5%
Subscan direction: ±20%
Single line pitch 0.6 mm or less at 1/6-inch pich
Cumulative line pitch (Note 4) ±0.8% or less at over 1/6-inch pitch
Linearity 0.6 mm/200 mm
Parallelism 1.0 mm/200 mm
Perpendicularity 1.2 mm/200 mm
Registration Left side: 5 ±2.5 mm
Top: 5 ±2.0 mm (at the width center)
Skew 0.5˚ or less (2.53 mm/290 mm)
Smearing OD ratio: 0.02 or less
Black dot 0.3 to 1.0 mm: 8 max. per drum cycle and
0.6 to 1.0 mm: 1/drum cycle max.
White dot 0.3 to 1.2 mm: 8 max, per drum cycle and
0.8 to 1.2 mm: 1/drum cycle max.
Jam (including pick error): single-sided; 1/3,000 sheets
double-sided; 1/1,500 sheets
Double feed: 1/2,000 sheets
Conditions and environment
Loading errors are to be excluded. (The loading procedure is as
specified in the user’s manual.)
The uppermost and lowermost sheets of paper in a package are to
be removed.
Paper feeding errors due to sheets at the boundary between old
stack of paper and new stack of paper are to be excluded.
The maximum number (250/500) of sheets of paper are to be
loaded on the paper tray at a time.
23˚C and 50% RH
Recommended paper
Size: A5, A4, A3, Letter, Legal, Executive, Ledger, JIS-B4, JIS-
B5
No.
14
15
16
17
18
19
Item
Noise (ISO 7779)
Ozone emission
Print quality
Notes:
1) This specification applies to the
recommended paper.
2) The print area is as specified in
No. 11.
3) The environmental conditions
are: 10 to 32.5˚C, 20 to 80%
RH.(max wet-bulb 29˚C)
Print precision
Notes:
1) This specification applies to the
recommended paper.
2) The print area is as specified in
No. 11.
3) The environmental conditions
are: 10 to 32.5˚C, 20 to 80%
RH.
4) At room temperature and
humidity
Printing defects (*12, *13)
Notes:
1) This specification applies to the
recommended paper.
2) The environmental condidtons
are: 10 to 32.5˚C, 20 to 80%
RH.
Paper transport stability (*13)
Notes:
1) This specification applies to the
recommended paper.
2) No options
To be continued to the next page