Sharp PN-R903 To set from a PC

46

E

■ To set from a PC

When the monitor is connected to a PC, LAN settings can be

congured via PC.

Set up process

(1) Connect your monitor to a PC

(2) Specify the PC’s IP address

(3) Congure the monitor’s LAN settings

(1) Connecting your monitor to a PC

Connect a commercially available crossover LAN cable

(UPT cable, Category 5) to the LAN port on the PC and this

monitor.

PC

LAN cable

(commercially available, crossover)

To LAN terminal

LAN terminal

(2) Specifying the PC’s IP address

To congure the monitor’s LAN settings, you must temporarily

change the settings on the PC.

This explanation is based on Windows 7.

1. Log on to the PC with an administrator account.

2. Click [Start], and then click “Control Panel”.

3. Click “View network status and tasks” in “Network and

Internet”.

In “Classic View”, click “Network and Sharing Center”.

4. Click “Local Area Connection” and then “Properties”.

5. Click “Internet Protocol Version 4 (TCP/IPv4)” and then

“Properties”.

6. Make a note of the current IP address, subnet mask, and

default gateway settings.

Make sure you write this information now as you will

be changing the IP address, subnet mask, and default

gateway settings back to these settings afterwards.

7. Temporarily change the IP address and subnet mask.

To access the monitor as it is shipped from the factory, set

as follows.

• IP Address: 192.168.150.1

• Subnet Mask: 255.255.255.0

• Default Gateway: (leave blank)

8. Click [OK] and then reboot the PC.

TIPS

• This monitor is factory preset as shown below.

(When DHCP CLIENT is set to OFF)

IP Address : 192.168.150.2

Subnet Mask : 255.255.255.0

Default Gateway : 0.0.0.0

(3) Conguring the monitor’s LAN settings

Access the monitor using Internet Explorer.

Controlling the monitor

1. Turn the power ON to the monitor.

2. Set RS-232C/LAN SELECT of COMMUNICATION

SETTING on the SETUP menu to LAN.

3. Set DHCP CLIENT of LAN SETUP of COMMUNICATION

SETTING on the SETUP menu to OFF.

PC operation

4. Launch Internet Explorer, in the “Address” box type

“http://192.168.150.2/” and press the Enter key.

Controlling the Monitor with a PC (LAN)

Contents

Main A. Information on Disposal for Users (private households) B. Information on Disposal for Business Users IMPORTANT INFORMATION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION SAFETY PRECAUTIONS DEAR SHARP CUSTOMER SAFETY PRECAUTIONS (Continued) WARNING: Especially for child safety TIPS AND SAFETY INSTRUCTIONS The Power Cord Manual Scope LED Backlight Fan MOUNTING PRECAUTIONS Supplied Components Contents nFront view Part Names nRear view Part Names nRemote control unit Connecting Peripheral Equipment Input mode Audio input terminal (Factory setting) Connection with a PC or AV equipment Connecting Peripheral Equipment Connecting the Power Cord Binding Cables Removing the Handles Preparing the Remote Control Unit Installing the batteries Remote control operation range Turning on the main power Turning Power On/Off Turning power on/off Turning Power On/Off nOperation mode nDate/time setting Disabling power on/off operations Basic Operation Basic Operation nSwitching the screen size Menu Items Displaying the menu screen nExample of operation nMenu screen display Menu item details nSCREEN n PICTURE Page nAUDIO nSETUP Page nMONITOR nMULTI/PIP nOTHERS nDual screen display nEnlarge nZOOM2 SPECIAL SETTING nSCHEDULE Adjustments for PC screen display nAutomatic adjustment nScreen display for adjustment Initialization (Reset)/Functional Restriction Setting (FUNCTION) Controlling the Monitor with a PC (RS-232C) PC connection nOne-to-one connection with a PC nDaisy chain connection Advanced operation Communication conditions nResponse code format nCommunication interval nID numbers nCommands for ID control nRepeater control nRepeater control command Setting of the GAMMA user data nTo transfer the GAMMA user data nSaving the GAMMA user data nActivating the GAMMA user data nChecking the GAMMA user data RS-232C command table Power control/Input mode selection SCREEN menu PICTURE menu AUDIO menu SETUP menu MONITOR menu MULTI/PIP menu IMAGE POSITION (EPOS) setting In landscape orientation 2 x 2 3 x 3 4 x 4 5 x 5 In portrait orientation 2 x 2 3 x 3 4 x 4 5 x 5 OTHERS menu Initialization/Functional Restriction Setting (FUNCTION) menu Others Commands for setting of the GAMMA user data Initializing personal information Controlling the Monitor with a PC (LAN) Settings to connect to a LAN To set on the monitor To set from a PC Set up process (1) Connecting your monitor to a PC (2) Specifying the PCs IP address (3) Conguring the monitors LAN settings Controlling with a PC Basic operation INFORMATION CONTROL ADJUSTMENT NETWORK (LAN SETUP) NETWORK (SECURITY) NETWORK (GENERAL) MAIL (ORIGINATOR) MAIL (RECIPIENT) MAIL (PERIODICAL) SNMP SERVICE & SUPPORT (URL INFORMATION) [Advanced operation] Command-based control (1) Connect the PC to the monitor. (2) Send commands to control the monitor. (3) Disconnect the connection with the monitor and quit the function. Troubleshooting Troubleshooting Specications nProduct Specications nDimensional Drawings nPower management nPOWER LIMITER (See page 23.) nDDC (plug and play) nCompatible signal timing (PC) nCompatible signal timing (AV) nDVI-I input terminal pins (DVI-I 29 pin) nPC/AV D-sub input terminal pins (Mini D-sub 15 pin) nDisplayPort input terminal pins nDVI-D output terminal pins (DVI-D 24 pin) nDisplayPort output terminal pins (DisplayPort 20 pin) nRS-232C output terminal pins Mounting Precautions (For SHARP dealers and service engineers)