Sharp PN-R903 NETWORK (LAN SETUP), NETWORK (SECURITY)

49 E

■ NETWORK (LAN SETUP)

This screen allows you to set the settings necessary when the

monitor is connected to a LAN.

DHCP CLIENT

If your LAN has a DHCP server and you wish to obtain an

address automatically, change this setting to ON.

To set the address manually, set this to OFF.

IP ADDRESS

If the DHCP CLIENT is set to OFF, specify an IP address.

SUBNET MASK

If the DHCP CLIENT is set to OFF, specify the subnet mask.

DEFAULT GATEWAY

If the DHCP CLIENT is set to OFF, specify the default

gateway.

If you are not using a default gateway, specify “0.0.0.0”.

DNS SERVER ADDRESS AUTO ACQUISITION

If the DHCP CLIENT is set to ON, specify whether or not to

automatically obtain the DNS server address.

DNS SERVER

Specify the DNS server address if the DHCP CLIENT

is SET to OFF or the DNS SERVER ADDRESS AUTO

ACQUISITION is set to OFF.

If you are not using a DNS server, specify “0.0.0.0”.

RESET

Clicking [Execute] returns all of the LAN SETUP settings

to the factory-preset values except for the DNS SERVER

ADDRESS AUTO ACQUISITION and DNS SERVER

settings.

TIPS

• When the IP address is set manually, the IP addresses of

the monitor connected to the RS-232C output terminal and

the daisy chain of connected monitors that follows can be

assigned automatically. (See page 25.)

■ NETWORK (SECURITY)

This screen allows you to specify the security-related settings.

USER NAME / PASSWORD

Sets up a user name and password to restrict access to this

monitor.

After entering a user name and password, click [Apply].

ACCEPT IP ADDRESS

You can limit access to this monitor by registering IP

addresses of PCs that should have access.

To limit access, specify the option “From only specic IP

addresses”. Otherwise, to allow access from any PC, specify

“All IP Addresses”.

IP ADDRESS 1 to 3

If “ACCEPT IP ADDRESS” is set to “From only specic IP

addresses”, enter the IP addresses that you want to allow.

TIPS

• The USER NAME and PASSWORD can be up to 8

alphanumeric characters (hyphens and underscores

allowed).

• To cancel the user name and/or password after it has been

set, make the box empty and click [Apply].

Controlling the Monitor with a PC (LAN)

Contents

Main A. Information on Disposal for Users (private households) B. Information on Disposal for Business Users IMPORTANT INFORMATION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION SAFETY PRECAUTIONS DEAR SHARP CUSTOMER SAFETY PRECAUTIONS (Continued) WARNING: Especially for child safety TIPS AND SAFETY INSTRUCTIONS The Power Cord Manual Scope LED Backlight Fan MOUNTING PRECAUTIONS Supplied Components Contents nFront view Part Names nRear view Part Names nRemote control unit Connecting Peripheral Equipment Input mode Audio input terminal (Factory setting) Connection with a PC or AV equipment Connecting Peripheral Equipment Connecting the Power Cord Binding Cables Removing the Handles Preparing the Remote Control Unit Installing the batteries Remote control operation range Turning on the main power Turning Power On/Off Turning power on/off Turning Power On/Off nOperation mode nDate/time setting Disabling power on/off operations Basic Operation Basic Operation nSwitching the screen size Menu Items Displaying the menu screen nExample of operation nMenu screen display Menu item details nSCREEN n PICTURE Page nAUDIO nSETUP Page nMONITOR nMULTI/PIP nOTHERS nDual screen display nEnlarge nZOOM2 SPECIAL SETTING nSCHEDULE Adjustments for PC screen display nAutomatic adjustment nScreen display for adjustment Initialization (Reset)/Functional Restriction Setting (FUNCTION) Controlling the Monitor with a PC (RS-232C) PC connection nOne-to-one connection with a PC nDaisy chain connection Advanced operation Communication conditions nResponse code format nCommunication interval nID numbers nCommands for ID control nRepeater control nRepeater control command Setting of the GAMMA user data nTo transfer the GAMMA user data nSaving the GAMMA user data nActivating the GAMMA user data nChecking the GAMMA user data RS-232C command table Power control/Input mode selection SCREEN menu PICTURE menu AUDIO menu SETUP menu MONITOR menu MULTI/PIP menu IMAGE POSITION (EPOS) setting In landscape orientation 2 x 2 3 x 3 4 x 4 5 x 5 In portrait orientation 2 x 2 3 x 3 4 x 4 5 x 5 OTHERS menu Initialization/Functional Restriction Setting (FUNCTION) menu Others Commands for setting of the GAMMA user data Initializing personal information Controlling the Monitor with a PC (LAN) Settings to connect to a LAN To set on the monitor To set from a PC Set up process (1) Connecting your monitor to a PC (2) Specifying the PCs IP address (3) Conguring the monitors LAN settings Controlling with a PC Basic operation INFORMATION CONTROL ADJUSTMENT NETWORK (LAN SETUP) NETWORK (SECURITY) NETWORK (GENERAL) MAIL (ORIGINATOR) MAIL (RECIPIENT) MAIL (PERIODICAL) SNMP SERVICE & SUPPORT (URL INFORMATION) [Advanced operation] Command-based control (1) Connect the PC to the monitor. (2) Send commands to control the monitor. (3) Disconnect the connection with the monitor and quit the function. Troubleshooting Troubleshooting Specications nProduct Specications nDimensional Drawings nPower management nPOWER LIMITER (See page 23.) nDDC (plug and play) nCompatible signal timing (PC) nCompatible signal timing (AV) nDVI-I input terminal pins (DVI-I 29 pin) nPC/AV D-sub input terminal pins (Mini D-sub 15 pin) nDisplayPort input terminal pins nDVI-D output terminal pins (DVI-D 24 pin) nDisplayPort output terminal pins (DisplayPort 20 pin) nRS-232C output terminal pins Mounting Precautions (For SHARP dealers and service engineers)